Cicada Audio CXK69 6x9" Component Speaker Kit | 2-Ohm or 4-Ohm

HIGH-OUTPUT 6X9 COMPONENT AUDIO Cicada Audio CXK69 6x9" Component Speaker Kit | 2-Ohm or 4-Ohm The Cicada Audio CXK69 is a complete component speaker system available in 2Ω and 4Ω versions for high-output motorcycle audio builds using compatible 6x9-inch speaker locations. Each kit combines powerful Carbon Matrix Composite mid-bass drivers, separate shallow ring-radiator horn tweeters and external crossovers for strong mid-bass, focused highs and dependable all-weather performance. Choose Impedance View Specifications Serious 6x9 Motorcycle Audio Available in 2Ω and 4Ω configurations High-output 6x9-inch mid-bass drivers 250 watts RMS per mid-bass driver Separate shallow ring-radiator horn tweeters External 12dB crossovers at 7kHz Carbon Matrix Composite™ cones Rain or Shine™ all-weather performance design Cicada CXK69 Component Kit Overview The Cicada Audio CXK69 is built for riders who want more output, stronger mid-bass and better high-frequency projection than a basic coaxial speaker can provide. This component system separates the 6x9-inch mid-bass drivers from the horn tweeters. The mid-bass drivers concentrate on powerful lower and middle frequencies while the dedicated tweeters produce the focused high-frequency output needed for open-road motorcycle listening. Select the CXK69.2 2Ω version or CXK69.4 4Ω version based on your amplifier, channel configuration and total system impedance requirements. Available Impedance Options and SKUs CXK69.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at a 2-ohm channel load and the system is designed to produce greater power into the lower impedance. CXK69.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker system configurations designed around a 4-ohm channel load. Choose carefully: The correct impedance depends on your amplifier’s rated load, the number of speakers connected to each channel and the final wiring configuration. Do not select impedance based only on which version appears to offer more power. What Comes in the Kit Pair of Cicada Audio 6x9-inch mid-bass drivers in the selected 2Ω or 4Ω configuration Pair of 4Ω 1-inch shallow ring-radiator horn tweeters External component crossovers Important: Motorcycle-specific saddlebag lids, cut-in kits, speaker adapters, grilles, tweeter mounting bridges and wiring harnesses are not included unless specifically stated in the product options. Why Riders Choose This Kit 250W RMS Mid-Bass Drivers The 6x9-inch drivers are engineered for substantial amplifier power and strong output in demanding open-air motorcycle environments. Separate Horn Tweeters Dedicated ring-radiator horn tweeters provide focused high-frequency projection without limiting the movement of the mid-bass cone. 2Ω or 4Ω Variants Two impedance options make it easier to match the component kit to different amplifiers, channel loads and multi-speaker configurations. Carbon Matrix Composite Cone Cicada’s CMC™ cone is lightweight, rigid, heat resistant and designed for efficient, controlled mid-bass performance. External Crossovers Dedicated external crossovers divide the audio signal between the mid-bass drivers and horn tweeters for controlled component operation. All-Weather Construction Rain or Shine™ construction supports real motorcycle use and the changing environmental conditions encountered on the road. Mid-Bass Driver Technology Carbon Matrix Composite™ cone provides a lightweight, strong and high-temperature-resistant speaker diaphragm OFC copper shorting ring helps extend the upper-frequency performance of the 6x9-inch mid-bass driver Black Coat™ OFC copper voice coil supports high conductivity, low resistance and extreme thermal performance N35SH neodymium motor provides strong motor force without the weight of a large conventional ferrite structure Die-cast aluminum basket features Cicada Audio Vortex Flow Venting™ for airflow and structural integrity 6x9-Inch Mid-Bass Specifications Available Models CXK69.2 and CXK69.4 Driver Type 6x9-inch mid-bass driver Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXK69.2 4Ω Variant SKU CXK69.4 Power Handling 250W RMS / 500W maximum Voice Coil 2 inches / 51mm Cone Material Carbon Matrix Composite™ Magnet N35SH neodymium Sensitivity 94dB, 1W / 1M Frequency Response 70Hz–10kHz ±3dB Mounting Depth 3.26 inches / 83mm Mounting Diameter 5.7 × 8.5 inches / 145 × 216mm Horn Tweeter and Crossover Specifications Tweeter Type 1-inch shallow ring-radiator horn tweeter Tweeter Impedance 4Ω Power Handling 50W RMS / 100W maximum Voice Coil 1 inch / 25mm Tweeter Dome Aluminum Magnet N35SH neodymium Sensitivity 101dB, 1W / 1M Frequency Response 2kHz–20kHz ±3dB Mounting Depth 1.1 inches / 28mm Mounting Diameter 2 inches / 50.8mm Crossover External 12dB crossover at 7kHz Fitment and Ordering Notes Fitment: The CXK69 is a component speaker system for compatible 6x9-inch speaker locations. Verify your motorcycle year, model, saddlebag lid configuration, mounting depth, required adapters and amplifier impedance requirements before ordering. Select CXK69.2 for the 2Ω mid-bass version. Select CXK69.4 for the 4Ω mid-bass version. Both kit variants include 4Ω horn tweeters. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Harley-Davidson saddlebag installations require compatible 6x9 speaker lids or a cut-in lid kit. Some factory speaker lids may require model-specific mounting adapters. Confirm tweeter, crossover and wiring placement before beginning installation. Apply the correct high-pass crossover and amplifier gain settings. Professional installation and system tuning are recommended. Best For High-output motorcycle saddlebag audio systems Compatible 6x9-inch Harley-Davidson speaker lids Custom saddlebag speaker installations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker builds requiring specific final channel impedance Riders wanting stronger mid-bass and focused high-frequency output Related Motorcycle Audio Categories Speakers and Saddlebag Lids Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Lids Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Installation Parts Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXK69 FAQ Is the CXK69 a coaxial or component speaker system? The CXK69 is a component system with separate 6x9-inch mid-bass drivers, horn tweeters and external crossovers. Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXK69.2 for the 2Ω mid-bass kit or CXK69.4 for the 4Ω mid-bass kit before adding the product to your cart. Are the tweeters also available in 2Ω and 4Ω versions? No. The separate ring-radiator horn tweeters supplied with both CXK69 variants are rated at 4Ω. Which impedance should I choose? Choose the impedance supported by your amplifier and overall speaker wiring plan. The 2Ω version can allow a compatible amplifier to produce more power, while the 4Ω version may be better suited to multi-speaker configurations or amplifiers designed around a 4-ohm channel load. How much power can the 6x9 speakers handle? Each 6x9-inch mid-bass driver is rated for 250 watts RMS and 500 watts maximum power. Does this kit include separate tweeters? Yes. The system includes separate shallow ring-radiator horn tweeters designed to operate through the included external crossovers. Will these speakers fit factory Harley saddlebag lids? Fitment depends on the motorcycle year, factory lid configuration, speaker opening, mounting depth and adapters being used. Compatible 6x9 speaker lids or a model-specific cut-in kit may be required. Are saddlebag lids included? No. Saddlebag lids, cut-in kits, grilles and model-specific adapters are sold separately unless specifically added as a product option. Does this component kit need an amplifier? A properly matched motorcycle amplifier is recommended to take advantage of the system’s power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for the mid-bass drivers and tweeters. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, model, saddlebag lid configuration, amplifier and planned speaker wiring. We’ll help determine which CXK69 impedance is correct and recommend the proper lid kit, wiring and supporting equipment. Call 864-334-6131 Ask GBS for Help