Cermalube Quart

CERMALUBE (1 QUART) ~ CERAMIC DRY FILM LUBRICANT ~ NOT FOR USE ON MAGNESIUM. WATER BASED, NON FLAMMABLE CORROSION AND CHEMICAL RESISTANT FRICTION REDUCING COATING. OUTPERFORMS STANDARD DRY FILM LUBRICANTS. DESIGNED FOR ANY RIGID OR SEMI RIGID SURFACE EXPERIENCING SLIDING, ROTATING OR OSCILLATING FRICTION. WITHSTANDS 350,000+ PSI LOADS AND 1600F+TEMPS. GREAT FOR LIGHT, MEDIUM, & HEAVY DUTY APPLICATIONS WITH A WIDE RANGE OF OPERATING TEMPS, LOADS, & SPEEDS. SURVIVES REPEATED EXPANSION AND CONTRACTION CAUSED BY CYCLIC HEATING AND COOLING. DESIGNED TO HAVE CURED FILM THICKNESS OF <.001. CLEANS UP EASILY WITH WATER PRIOR TO CURING. ACQUIRES GLASS LIKE FINISH IN USE. INSTRUCTIONS ON USE : Follow normal ceramic prep procedures. Prior to spraying blast with Black Beauty, Aluminum Oxide, or sand for prep (DO NOT USE GLASS BEAD). Wipe down thoroughly with acetone or MEK only and let evaporate completely. Do not use chemical degreasers/phosphatizers. Place in oven at 450F for 1 hr, remove and let cool. Apply coating with airbrush or .6-.8mm tip touch up gun. This should be done at 50-60 lbs of air pressure. Let parts air dry 30-60 minutes. Cure in oven at 350F for 1 hr. *NOTE: PLEASE CHOOSE UPS AS SHIPPING METHOD. WE CANNOT SHIP USPS ON CHEMICALS.