Ceramic Coating Indoor Hygrometer & Thermometer

Indoor Temperature & Humidity Monitor for Coating Applicators The Ceramic Coating Indoor Hygrometer gives applicators real-time visibility into the two environmental factors that most affect coating performance: ambient temperature and humidity. Both directly influence how coatings spray, flash, and cure, and reading the room before each application lets you adjust spray settings accordingly. The sensor refreshes every 10 seconds and reads accurate to ±2°F or ±1°C on temperature and ±2 to 4% on relative humidity, with an upper temperature range of 158°F. Built for ceramic coating applicators, paint shops, dealership reconditioning departments, and detail bays where consistent application conditions separate good results from rework. Knowledge is power, and power over your environmental conditions makes every project more successful. Features: 🌡️ ±2°F / ±2-4% RH Accuracy: Reads ambient temperature accurate to ±2°F or ±1°C and relative humidity accurate to ±2-4%, the resolution coating applicators need to dial in spray settings. ⚡ 10-Second Refresh Rate: Sensor updates every 10 seconds so changing shop conditions show up in real time, not after the fact. 📦 Tabletop Mount Design: Stands on the bench, prep table, or coating cart without permanent installation. Powered by a single 1.5V alkaline button battery. 🎯 Built for Coating Workflow: Designed specifically for ceramic coating applicators to verify environmental conditions before spraying, reducing flash and cure issues from out-of-spec humidity.