Eterra Cement Mixing Bowl for Skid Steer

Eterra Cement Mixing Bowl for Skid Steer The Eterra cement mixing bowl turns the auger drive you already own into a concrete mixer. Load the bowl with mix and water, and the same drive that bored the hole mixes the concrete that fills it. For crews setting posts and pouring footings, it removes a wheelbarrow, a mixer and a second trip from the job. Available from Skid Steer Store. Requires an Auger Drive with Flip Mount The bowl runs on an Eterra auger drive ordered in a Flip Mount configuration — not a standard mount. Mixing and pouring need the bowl held level and then tipped to discharge, and only the Flip Mount frame's 180° rotation performs both motions. A standard-mount drive cannot run this bowl. Your Auger Drive Can It Run the Bowl? 2500 / 3500 / 4500 — Flip Mount Yes 2500 / 3500 / 4500 — Standard Mount No — needs a Flip Mount drive Excavator Auger Cradle No Buying both together? Order your auger drive in a Flip Mount — Universal or Flip Mount — Bobcat configuration from our Eterra Auger Drive listing, then add this bowl. Dig the Hole, Then Fill It Uses your existing auger drive — no separate mixer attachment, no extra hydraulics. 2" hex fitment — standard on every Eterra auger drive. Mix at the hole — batch exactly what the footing needs, right where it is needed. Swap in minutes — pull the bit, fit the bowl, keep working. No truck minimum — ideal for jobs too small or too remote for ready-mix delivery. What You Need to Run It Requirement Detail Auger Drive Eterra 2500, 3500 or 4500 — Flip Mount configuration required Output Shaft 2" hex Carrier Skid steer, compact track loader or mini skid steer Extra Hydraulics None — runs off the auger drive circuit Common Applications Fence and sign post setting, deck and pergola footings, mailbox and light pole bases, dock posts, small pad and repair pours, and mortar batching for hardscape work. Frequently Asked Questions Can I run the bowl on a standard mount auger drive? No. The bowl must be held level to mix and tipped to pour, which only the Flip Mount frame's 180° rotation allows. You need an auger drive ordered in a Flip Mount configuration. I already own a standard mount drive. What are my options? Contact Skid Steer Store — we will advise whether your drive can be converted or whether a Flip Mount drive is the better route. Will it fit my auger drive? It mounts to the 2" hex output standard on all Eterra auger drives, provided the drive is in a Flip Mount configuration. Do I need extra hydraulics? No. The bowl is driven by the auger motor you are already running. How does this compare to a Hurricane concrete mixer? The bowl batches footing-sized quantities using equipment you own. The Hurricane BMX mixers are dedicated attachments that scoop, mix on the move and dispense far larger volumes. Choose the bowl for post setting, the Hurricane for slabs and production pours. Order From Skid Steer Store Add the bowl to your cart above — and make sure your auger drive is a Flip Mount configuration. Not sure which drive you have? Contact Skid Steer Store with your model and we will confirm before you order.