CDD-LIVE15 15” 2-Way Active Powered Speaker

The CDD-LIVE15 is an active loudspeaker. It is a great option for professional install or portable live applications. From The Manufacturer: The CDD-LIVE 15 is a self-powered two-way system designed for professional live applications and installations that demand the ultimate in sonic performance from a single enclosure. Its powerful Coaxial Differential Dispersion driver comprises a 15” (380mm)/3” (75mm) voice coil LF driver and a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm. With a maximum SPL of 132dB peak at 1 metre, it is the ideal solution for medium-scale touring, theatre and portable live sound applications, as well as premium installations and stage monitor use. Features: High-power, self-powered two-way system Coaxial Differential Dispersion™ technology Onboard Class D amplification and DSP Dante™ Digital Audio networking Global mains operation with Power Factor Correction User-rotatable CDD™ driver Vertical and horizontal mounting options Tour-grade, multi-angle plywood enclosure IP24 rating option with rain cowl Comprehensive mounting accessories Applications: Live sound reinforcement Theater sound Corporate AV events Fixed installations in concert halls, ballrooms and HoW Stage monitor and sidefill Bars and clubs Specifications: Type High-output, Coaxial Differential Dispersion powered two-way system Frequency Response 55Hz – 20kHz ±3dB, -10dB @ 45Hz Driver LF: 15” (380mm)/3” (75mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1.4” (36mm) exit/3” (75mm) voice coil, titanium dome compression driver Input Sensitivity -30dBu for 100dB SPL Maximum SPL 126dB continuous / 132dB peak Dispersion 100˚-60˚ horizontal, 60˚ vertical (user-rotatable) Crossover 1.5kHz Active LR8 with low latency HF FIR equalization Balance presets for pole mount/ pole mount with sub/ stage monitor Connectors Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon Analogue Input Impedance 20 kΩ balanced to ground Maximum Analogue Input Leve 24.6 Vpp (+21dBu), over voltage protected Internal Processing Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct HPF Low latency HF FIR filters Up to 200ms input delay Pre-set selection via rear panel switch Network Connectors 2xNeutrik® Ethercon Network Protocol TCP/IP and UDP/IP Amplifier Type 2 channel switch-mode, class D, Bridged Tied Load + 1 channel switch-mode, class D Amplifier Peak Output Power 2500W total 2000W LF, 500W HF Amplifier Average Efficiency 89% Amplifier Cooling External convection cooled, with internal fan Amplifier Maximum Ambient Temperature 40°C (104°F) for full output Power Supply Type Switch mode, fixed frequency with PFC Power Supply AC Input Operating Range 85 – 265V ~ AC, 50 - 60Hz Power Supply Power Factor > 0.98 Power Supply Nominal Power Consumption 550W Power Supply Mains Connector Neutrik® Powercon True1 Enclosure Extensively braced multi-laminate plywood. Finish Textured black PU coating. Protective Grille HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth. Fittings Top hat for pole mounting 15 x M8 mounting points Two side pocket handles Optional weather protection cowl IP Rating IP24 factory option available Dimensions (W) 427mm x (H) 696mm x (D) 422mm (W) 16.81in x (H) x 27.42in (D) 16.61in Weight (excluding Transit cover) 37kg 81.4lbs  Accessories Transit Cover Optional yoke and universal brackets (Please Request a Quote)