CDD-LIVE12 Speaker

The CDD-LIVE is an active loudspeaker for professional applications. It is a great option for those looking for a high output solution for portable or install applications. From The Manufacturer: The CDD-LIVE 12 is a high-performance, self-powered system designed for professional applications that require high output levels and exceptional fidelity from a very compact enclosure. With a peak output capability of 128dB at 1 meter, it is the ideal solution for a multitude of premium stand-alone and distributed sound reinforcement requirements — from touring, theatre and portable live sound, to concert hall and HoW installations, AV events and stage monitor use. Features: Compact, self-powered two-way system Coaxial Differential Dispersion™ technology Onboard Class D amplification and DSP Dante™ Digital Audio networking Global mains operation with Power Factor Correction User-rotatable CDD™ driver Vertical and horizontal mounting options Tour-grade, multi-angle plywood enclosure IP24 rating option with rain cowl Comprehensive mounting accessories Applications: Live sound reinforcement Theater sound Corporate AV events Fixed installations in concert halls, ballrooms and HoW Stage monitor and infill Bars and clubs Specifications: Type Compact, Coaxial Differential Dispersion powered two-way system Frequency Response 62Hz – 20kHz ±3dB, -10dB @ 50Hz Driver LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver Input Sensitivity -30dBu for 100dB SPL Maximum SPL 122dB continuous / 128dB peak Dispersion 110˚-60˚ horizontal, 60˚ vertical (user-rotatable) Crossover 1.5kHz Active LR8 with low latency HF FIR equalization Balance presets for pole mount/ pole mount with sub/ stage monitor Connectors Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon Analogue Input Impedance 20 kΩ balanced to ground Maximum Analogue Input Level 24.6 Vpp (+21dBu), over voltage protected Internal Processing Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct HPF Low latency HF FIR filters Up to 200ms input delay Pre-set selection via rear panel switch Network Connectors 2xNeutrik® Ethercon Network Protocol TCP/IP and UDP/IP Amplifier Type 2 channel switch-mode, class D, Bridged Tied Load + 1 channel switch-mode, class D Amplifier Peak Output Power 2500W total 2000W LF, 500W HF Amplifier Average Efficiency 89% Amplifier Cooling External convection cooled, with internal fan Amplifier Maximum Ambient Temperature 40°C (104°F) for full output Power Supply Type Switch mode, fixed frequency with PFC Power Supply AC Input Operating Range 85 – 265V ~ AC, 50 - 60Hz Power Supply Power Supply Power Supply POWER FACTOR > 0.98 Nominal Power Consumption 550W Mains Connector Neutrik® Powercon True1 Enclosure Extensively braced multi-laminate plywood. Finish Textured black PU coating. Protective Grille HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth. Fittings Top hat for pole mounting 15 x M8 mounting points Two side pocket handles Optional weather protection cowl IP Rating  IP24 factory option available Dimensions (W) 359mm x (H) 580mm x (D) 373mm (W) 14.13in x (H) 22.83in x (D) 14.69in Weight 28kg (61.6lbs) excluding Transit cover Accessories Transit Cover Optional wall, yoke and universal brackets