Mid Carver 2+1

FCS II CARVER 2 + 1 FIN SET Clean and understated in appearance, yet modest in reliability and performance. Solid fiberglass material combined with two proven templates. This set just works and allows you to trim, turn and feel the smooth groove on any midlength. Overview The Midlength thruster set was designed for boards set up with a standard thruster configuration. The set is made up of the Carver XL side fins which produce exception drive and hold, and the Performer Large centre fin which is known as a versatile and reliable fin in all conditions. When paired together, the set will produce incredible drive and hold off the bottom with a predictable feel off the top. The combined area of this set allows surfers to hold a longer turn and maintain control as they move and adjust their feed position on these longer boards. The Performance Glass materials also makes this set a great option for bigger, heavier surfers wanting a stiffer and highly responsive thruster set. Thruster set for mid-lengths Carver XL Sides + Performer Large Centre Traditional PG Materials Ideal Conditions Open face, down-the-line waves, particularly good in point and reef breaks. Board Types Designed to fit the FCS II Fin System. Suitable for midlengths, and recommended for boards with deep concaves and moderate-to-extreme rocker. Fin Family Carver: Find Power. Powerful, drawn-out turns with added hold. Performance Glass Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations. X-LARGE (Over 85Kg / 190 Lbs)  Fin Base (inches) Base (mm) Depth (inches) Depth (mm) Area (inches) Area  (mm) Sweep Deg°  Foil Side  4.69 119 4.77 121 16.51 10650 37° Flat Side  4.48 113.7 4.67 118.4 15.58 10054 33.8° 50/50