Barwald Professional Carpet & Vinyl Dye

Restore & Revitalize Carpets! Revolutionize your approach to surface restoration with BARWALD Professional Leather, Vinyl, Carpet & Hard Plastic Refinisher. Crafted to breathe new life into carpets, vinyl, leather, and select hard plastics, this is not just a product – it's your key to rediscovering the vibrant essence of your spaces. Features: 🌟 Ultimate Color Restoration: BARWALD's advanced formula is tailored for unparalleled color restoration, ensuring your surfaces regain their original vibrancy. 🛠️ Effective Surface Preparation: Begin the transformation by preparing surfaces meticulously. For non-carpeted areas, a gentle sanding with 400 grit sandpaper removes imperfections. Wipe surfaces with isopropyl alcohol, mineral spirits, or a residue-free cleaner for an immaculate canvas. 🌿 Eco-Friendly Approach: Embrace an eco-friendly journey with BARWALD. Our formula is designed to deliver exceptional results while minimizing environmental impact. ⚙️ Effortless Application: BARWALD simplifies your restoration process. Apply, let it work its magic, and watch as your surfaces transform before your eyes. Directions: 1. Ensure that surface, air and product are between 60-85F. To ensure complete mixture of pigment, shake can for 1 full minute after mixing ball can be heard. Do not stick a pin or other sharp object into the hole in the top of the can. 2. The use of an adhesion promoter will help adhesion to some surfaces. 3. Hold can approximately 10-12 inches from the surface and press down the actuator to spray. 4. Shake can often during application. 5. Apply thin coats, spraying with even, misting passes. Multiple coats may be needed for full hiding with some colors. 6. Allow each coat to dry before applying the next. 7. When finished, clear the spray valve by turning the can upside down and spraying for approximately 3 seconds. 8. NOTE: Gloss may be lower & color lighter under high humidity conditions. Test for adhesion by rubbing down clear packing tape in an inconspicuous area & pulling after 30 seconds. Link the to SDS