Carl's Place Pipe Framing Kit - Pro Golf Enclosure

Skip the hassle of sourcing, cutting and transporting your own frame pipe with the Carl’s Pipe Framing Kit. It includes the necessary pre-sized pipes to assemble your golf simulator enclosure frame, making setup faster, easier and more convenient. With no store runs, special tools or pipe cutting required, you can spend less time building and more time enjoying your simulator. The Pro Golf Enclosure Kit supplies the fittings, the screen and the fabric, but not the pipe. This kit is the pipe: 2-inch EMT conduit cut to the exact lengths your size and depth require, and marked so every piece goes where it belongs. Sourcing it yourself is possible but harder than it sounds. Carl's Place is direct about this - 2-inch EMT can be difficult to buy locally, and it is worth confirming a supplier near you before deciding to self-source. You also need a way to transport and cut long, heavy conduit accurately, because the Pro frame is what carries your mounted projector or overhead launch monitor and it needs to be square. Since the October 2025 Pro update these kits ship by ground rather than freight, which means no freight booking, no pallet and no delivery appointment - it arrives at the door by standard carrier. Select the enclosure size and depth that match your enclosure exactly. If you are ordering this separately from the enclosure, check your original order or the specification chart before choosing. Shipping costs are calculated at checkout. Available in the following options: Six enclosure sizes: 8 x 10.5, 8.5 x 11, 8.5 x 14.5, 9 x 12, 10 x 13 and 10 x 15.5 ft Four depths: 5 ft, 8 ft, 10 ft and 15 ft Features Pre-cut to your size and depth - every length arrives ready to assemble, no measuring and no cutting Marked for position - each pipe is labelled so the frame goes together in order 2 in EMT electrical metallic tubing - the specified frame material for the Pro enclosure, and the reason the frame can carry mounted electronics Ships by ground - changed from freight with the October 2025 Pro update, so no pallet and no freight scheduling Solves a real sourcing problem - 2 in EMT is difficult to buy locally in many areas Cut accuracy matters - a square frame is what keeps a frame-mounted launch monitor aligned In The Box Pre-cut and marked 2 in EMT pipes in the lengths and quantities required for the Pro enclosure size and depth selected The Pro Golf Enclosure Kit, which supplies the fittings, screen and enclosure fabric, is sold separately. Crossbar and back cover kits include their own pipes. Specifications Pipe material 2 in EMT (electrical metallic tubing) Supplied Pre-cut to length and marked for position Compatible with Carl's Place Pro Golf Enclosure Kit only - sold separately Enclosure sizes 8 x 10.5, 8.5 x 11, 8.5 x 14.5, 9 x 12, 10 x 13 and 10 x 15.5 ft Depths 5 ft, 8 ft, 10 ft and 15 ft Frame-mounted electronics Supported - the Pro frame carries projectors, overhead launch monitors and lighting Shipping Ground carrier since the October 2025 Pro update; no pallet or lift gate required Warranty None - Carl's Place does not warrant its enclosure components Origin Carl's Place, Milton, Wisconsin, USA Manuals Installation guide and setup documentation coming soon. For support, email support@simulatorshq.com