Carlisle EPDM Pressure-Sensitive RUSS Strip

Carlisle EPDM Pressure-Sensitive RUSS Strip Carlisle EPDM Pressure-Sensitive RUSS Strip is a nominal 45-mil-thick, reinforced EPDM membrane strip with a 30-milcured EPDM splice tape that is laminated along one or both edges depending on the size.  They are available in both 6″ and 9″ widths and the adhesive strips are 3″ wide.  The 6″ RUSS has splice tape along on edge and can be installed horizontally or vertically.  The 9″ strip has splice tape along both edges, but can only be installed horizontally.  The 6″ PS RUSS must not be used in the field of the roof on mechanically fastened roofing systems.  On the other had, the 9″ PS RUSS has to be used in the field of a mechanically fastened roof system. Features and Benefits 6″ RUSS strip provides added membrane for securing the perimeter at walls, curbs and expansion joints 9″ RUSS strip provides added membrane for securing field membrane on mechanically fastened roof systems As tough as the field membrane Fully cured state enables it to handle expansion and contraction loads without weakening Resists tearing, flex cracking and abrasion caused by temperature extremes, sunlight, precipitation and all forms of normal weathering Specifications Base Membrane: EPDM (polyester reinforced) with synthetic rubber adhesive Roll Size: 6″ x 100′ & 9″ x 100′ Thickness: EPDM (45-mil) / Tape (30-mil) Shelf Life – 1 year Downloads Product Data Sheet To view other EPDM accessories we offer, please click ‘here’. If you do not see what you are looking for or would like additional information on this product, please feel free to call us at 1 (800) 267-2308 or email us at internetsales@crssupply.com.