Canor Virtus I2 - Integrated Tube Amplifier

Canor Virtus I2 Integrated Tube Amplifier Premium Line The Virtus I2 is a new-generation tube amplifier that utilizes KT88 high-power tubes and features an entirely new topology. The goal of its development was to enhance the superior sound quality of the previous model version. This amplifier runs in a pure class A with an auto-bias function, as well as cathode feedback. Highlights 01 Operates in a pure class A with an auto-bias 02 Instant switching between a triode and ultra-linear modes 03 Possibility to create a monoblock setup of two units. Main Features Carefully chosen vacuum tubes Canor products use only carefully chosen and matched tubes. We subject all tubes to a 200-hour burn-in process and rigorous testing, selection, and pairing to ensure optimal performance. Power transformer To eliminate mechanical hum, the transformer core undergoes vacuum impregnation and is encapsulated in a special anti-vibration compound. Furthermore, the transformer is enclosed in a sturdy, welded cover that provides excellent electromagnetic shielding and enhances the signal-to-noise ratio. To prevent interference from external voltage sources, the primary and secondary windings are separated by a copper foil shield with a 50% overlap. Monoblock connection To enhance both performance and sound quality, you can make a monoblock connection of two Virtus 12 units using a data cable. One of the units will function as the "master" while the other will serve as the "slave". This is referred to as the bridge connection of two amplifiers, which utilizes a fully symmetrical connection. Voltage Stabilization Circuit The Canor Virtus 12 features a Voltage Stabilization Circuit (VSC) that constantly monitors the input voltage and switches to the appropriate input transformer winding accordingly. The input transformer has three primary windings - 230V, 240V and 250V. This ensures optimal performance and extends the lifespan of the tubes. Volume attenuator The attenuator provides a gain control of 1dB, minimum attenuation of 63 dB. The designed solution demonstrates signal passing through 0 up to 6 relay contacts depending upon volume. The deviation between the sync of the left and right channels of the attenuator is lower than 0.05 dB, this outclasses even the best potentiometers. Channel separation The relay attenuator has two separate blocks for each channel, resulting in even better channel separation. This type of volume control is typically found in more expensive amplifiers but has been proven to be the best option in listening and audible tests. CMT ™ technology The Virtus 12 utilizes our advanced CMT TM technology (CANOR PCB Milling Technology) for optimal performance. The CMT™™ technology allows us to get the dielectric loss factors (loss tangent) of PCB close to the loss factor of air. Thanks to this technology we managed to get repeatedly to the parameter level of the so-called "wire-to-wire connections". Color variants Black version Silver version Gallery Overview Product Features an integrated tube amplifier operating in class A, providing an output power of 2 x 40 W KT88 high-power tubes with autobias with a cathode feedback an option to switch between triode and ultra-linear mode instantly PCBs utilize our premium CMT ™ technology perfect channel separation using a relay attenuator that features individual blocks for each channel. The gain control is in increments of 1 dB and attenuates up to 63 dB the independently powered control part capacitors with high capacitance in the filter provide energy for precise and well-defined bass the signal path exclusively contains high-quality polypropylene capacitors precise selection and pairing of the tubes meet above-average parameters the synchronous control option allows the use of two amplifiers in a monoblock mode without the need for an extra preamplifier. This Master/Slave mode has an output power of 80 W per channel Technical specification Amplifier classA Stereo output power2 x 40 W / 4, 8 Ω – ultra-linear 2 x 20 W / 4, 8 Ω – triode Monoblock output power1 x 80 W / 8 Ω – ultra-linear 1 x 40 W / 8 Ω – triode Gain30 dB (at 8 Ω) 28 dB (at 4 Ω) Inputs sensitivity500 mV Frequency range10 – 50 000 Hz -0,5 dB / 5 W Input impedance30 kΩ Inputs4 x RCA, 2 x XLR (XLR active in monoblock connection only) Outputs1 x RCA Line-out (Line fix) Total Harmonic Distortion< 0,05% / 1 kHz, 5 W Signal-to-noise ratio> 95 dB Signal-to-noise ratio monoblock> 100 dB Filtration capacity2200 uF / 500V Damping factor at 4 Ω load at the output 9 (based on measured output impedance) Damping factor at 8 Ω load at the output10,5 (based on measured output impedance) Tube complement 4 x KT88 / 1 x 12AX7 / 2 x 12AT7 Power230 V / 50 Hz / 375 VA Dimensions (w x h x d)435 x 170 x 485 mm Weight28 kg Reviews Canor Virtus I2 – Review – Audioreview (IT) Canor Virtus I2 - Quando il family look va oltre le aspettative. 15.03.2025 Canor Virtus I2 – Review – HiFiStatement (DE) Canor Virtus I2 - Premium Line 11.03.2025 Canor Virtus I2 – Review – HiFi Deep Dive (DE) Canor Virtus I2 - Röhren-Zauber aus der Slowakei 31.01.2025 Canor Virtus I2 – Review – Hi-Fi News (EN) Canor Virtus I2 - Integrated Amplifier 01.03.2024 Canor Virtus I2 – Review – FWD (NL) Canor Virtus I2 - Een warme gloed maar ook kracht 29.01.2024 Canor Virtus I2 – Review – LowBeats (DE) Canor Virtus I2 - Die volle Pracht 21.11.2023 Canor Virtus I2 – Review – i-Fidelity (DE) Canor Virtus I2 - Der Leidenschaftliche 23.10.2023 Canor Virtus I2 – Review – AudioMuzoFans (PL) Canor Virtus I2 - Hi-endowy wzmacniacz lampowy 18.10.2023 Downloads Canor - product catalog 2026 (English) Canor - product brochure 2026 (German) Canor - product brochure 2024 (中文版) Canor - Integrated amplifiers - monoblock connection Canor Virtus I2 - User Manual (English)