Canor AI 1.20 - Integrated Solid-State Amplifier

Canor AI 1.20 Integrated Solid-State Amplifier Premium Line CANOR AI 1.20 is an integrated solid-state amplifier in pure class-A up to 50 W per channel with a relay attenuator with two standalone blocks for each channel. Highlights 01 Operates in a pure class A 02 264 000 uF of total filtering capacitance 03 Possibility to create a monoblock connection of 2 units Main Features Heat disposal We used a special copper plate for heat dissipation, which is installed on the heatsink and the power transistors are installed directly on the given copper plate. Dual-mono connection Dual-mono connection each channel has its own power transformer. Power transformers are located in separate parts of the device. Amplifier design A shielded tunnel passes through the center of the Al 1.20 amplifier, in which filters with nanocrystalline coils are located. In addition, the input circuits are equipped with low-noise J-P transistors. Monoblock connection For even better performance and sound, it is possible to connect Al 1.20 as monoblocks using a data cable. One unit becomes the "master" unit and the other the "slave". This is the so-called bridge connection of two amplifiers (a fully symmetrical connection) Color variants Black version Silver version Gallery Overview Product Features an integrated solid-state amplifier in pure class-A up to 50 W per channel a relay attenuator with two standalone blocks for each channel PCB’s utilize our premium CMT™ technology (CANOR® PCB Milling Technology), it is the way we mill printed circuit boards CMT™ technology originated in a long-standing endeavour to improve the sonic performance of our products power supply units with filtered out interfering signals from the mains supply interference-rejection and as small as possible leakage field ensure custom-wound toroidal transformers 264 000 uF of filtering capacitance simulates a nearly stabilized supply voltage an option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 100W per channel Technical specification Amplifier classA Stereo output power2 x 50 W / 4 Ω 2 x 30 W / 8 Ω Monoblock output power1 x 130 W / 4 Ω 1 x 100 W / 8 Ω Gain 30 dB Frequency range20 – 25 000 Hz -0,5 dB / 5 W Input impedance30 kΩ Inputs5 x RCA, 2 x XLR (XLR active only in monoblock connection) Total Harmonic Distortion<0,0009% / 1 kHz, 5 W Signal-to-noise ratio> 90 dB Signal-to-noise ratio monoblock> 100 dB Filtration capacity132 000uF (per channel) Damping factor at 4 Ω load at the output250 (based on measured output impedance) Damping factor at 8 Ω load at the output 500 (based on measured output impedance) Power 230 V / 50 Hz / 375 VA Dimensions (w x h x d)435 x 170 x 485 mm Weight28 kg Reviews Canor Virtus I2 – Review – Audioreview (IT) Canor Virtus I2 - Quando il family look va oltre le aspettative. 15.03.2025 Canor Virtus I2 – Review – HiFiStatement (DE) Canor Virtus I2 - Premium Line 11.03.2025 Canor Virtus I2 – Review – HiFi Deep Dive (DE) Canor Virtus I2 - Röhren-Zauber aus der Slowakei 31.01.2025 Canor Virtus I2 – Review – Hi-Fi News (EN) Canor Virtus I2 - Integrated Amplifier 01.03.2024 Canor Virtus I2 – Review – FWD (NL) Canor Virtus I2 - Een warme gloed maar ook kracht 29.01.2024 Canor Virtus I2 – Review – LowBeats (DE) Canor Virtus I2 - Die volle Pracht 21.11.2023 Canor Virtus I2 – Review – i-Fidelity (DE) Canor Virtus I2 - Der Leidenschaftliche 23.10.2023 Canor Virtus I2 – Review – AudioMuzoFans (PL) Canor Virtus I2 - Hi-endowy wzmacniacz lampowy 18.10.2023 Downloads Canor - product catalog 2026 (English) Canor - product brochure 2026 (German) Canor - product brochure 2024 (中文版) Canor - Integrated amplifiers - monoblock connection Canor Virtus I2 - User Manual (English)