Can-Am Maverick R 2024+ LED Light Bar Brackets

ROKBLOKZ LED LIGHT BAR BRACKETS FOR THE CAN-AM MAVERICK R MULTIPLE LIGHTING OPTIONS: Designed to accept a wide range of light bars using so you're not locked into one brand of lighting. CLEAN, NO-DRILL MOUNT: Mounts to the OEM upper cage pillar support holes — no drilling required. REVERSIBLE DUAL-WIDTH MOUNTING: Mount outside the cage for a 51.5" width, or flip the brackets to mount inside the cage for a 46" width — pick the fit that matches your light bar. DURABLE MATERIALS: Powder-coated steel brackets with stainless steel mounting hardware, built to handle real trail use.  LOW-PROFILE FIT: Mounts level with the roofline for a clean, integrated look that doesn't crowd your windshield or cage accessories. EASY INSTALLATION: Simple, straightforward install with provided hardware. ADDITIONAL PROTECTION AVAILABLE: Also check out our Fender Kit, Trailing Arm Mud Flaps, CV Guard, flag Mounts and Skid Plates. MADE IN THE USA Please factor in1-3 Business Days for Processing and Assembly. WHAT'S INCLUDED: Each RokBlokz LED Light Bar Bracket kit for the Can-Am Maverick R comes with a RIGHT and LEFT bracket, stainless steel and rust resistant mounting hardware and installation instructions. Light bar not included. WHAT IT FITS: 2024+ Can-Am Maverick R & 2025+ Maverick R Max with OEM Cage -Works with most windshield options. However, if your windshield wraps around the outside of the cage, it may cover the mounting area.  MOUNTING OPTIONS: These brackets are reversible. Mount outside the cage for a 51.5" width, or flip them to mount inside the cage for a 46" width. Pictured here mounted outside the cage (51.5") with a Baja Designs 50" light bar — measure your own light bar's mounting-foot spread to confirm which orientation fits best. DOESN'T FIT: Full windshields that wrap around the outside of the Cage 2017+ Maverick X3 models & any other Can-Am model or SXS FREE SHIPPING in the contiguous U.S. International shipping is available. You can see pricing in the shopping cart. Please note that International Taxes and Duties are not included in the shipping quote and are the responsibility of the buyer. CHECK OUT OUR OTHER MAVERICK R ACCESSORIES HERE: Fender Flares for full-coverage mud and debris protection. Knuckle Mounted Fenders to block the spray off the top of the tire. Trailing Arm Mud Flaps to shield your trailing arms and calipers from rock spray. Can-Am Maverick R Light Bar Brackets Built for a Clean, No-Drill Install Built for Real Light at Maverick R Speeds The Can-Am Maverick R is not a slow machine, and anyone who has driven one hard knows how quickly the stock lighting can start to feel limited after dark. Factory headlights are useful for slower trail riding, loading up, cruising around camp, or getting back to the trailer. But when you are moving fast through the desert, dunes, or open terrain, you can catch the end of your light in a hurry. That is where a good light bar setup makes a big difference. More forward lighting helps push visibility farther down the trail, giving you more time to see what is coming before you are already on top of it. Rocks, whoops, washouts, dust, turns, trail markers, animals, and other riders all show up fast when you are driving a 240 hp Maverick R at speed. A properly mounted LED light bar helps fill that gap between “I can see in front of me” and “I can see far enough to keep driving with confidence.” The Rokblokz Can-Am Maverick R LED Light Bar Brackets give you a clean, solid way to add the lighting your machine deserves. Instead of drilling into your OEM cage or relying on bulky universal clamps, these brackets mount directly to the factory upper cage pillar support holes for a simple, no-drill install. The reversible design gives you two mounting options: mount outside the cage for a 51.5-inch width or flip the brackets inside the cage for a 46-inch width. That gives you more flexibility when choosing a light bar and makes it easier to match the bracket setup to your preferred lighting brand. Just measure your light bar's mounting spread before ordering to confirm the best orientation for your setup. Built from heavy duty powder-coated steel and paired with stainless mounting hardware, these brackets are made for real off-road use. They keep the light bar positioned near the roofline for a clean, low-profile look that works with the Maverick R’s factory cage instead of making it look cluttered. Designed to work with most windshields.  Whether you are running dunes after dark, chasing your crew through the desert, or just want better visibility for the ride back to camp, Rokblokz LED Light Bar Brackets give your Maverick R a clean, secure place to mount the lighting you need. See farther. Mount it clean. Keep the factory cage looking right. Seeking Local Vehicles for Fitment Testing At RokBlokz, we're always looking for vehicles in or near Provo, UT to help us refine and perfect our mud flap designs. If you're local and want to see if your vehicle qualifies, check out our list of needed models here. Participating owners receive special perks and the chance to be part of our design process! Frequently Asked Questions Can-Am Maverick R LED Light Bar Brackets What's the difference between inside and outside cage mounting? Mounting the brackets outside the cage gives you a 51.5" width — great for larger light bars. Flipping the brackets to mount inside the cage narrows that to 46", which works better for smaller bars or tighter clearance needs. Will these work with a full windshield installed? These mounting Brackets will work with most aftermarket windshields. It appears that there are a couple that wrap around the outside of the Cage and interfere with the mounting area. Incompatible models are by Bent Metal and Dirt Warrior What light bar is shown in the photos? The photos show a Baja Designs 50" light bar, brackets are mounted outside the cage at the 51.5" width setting. Other brands and sizes will work as long as your light bar has end mounts and it's length is close to either 46" or 51.5", depending on which orientation you choose. What size light bar can I mount? Anything with a mounting-foot spread or length close to 46" (inside-cage mount) or 51.5" (outside-cage mount). Measure the distance between the holes in your light bar's mounting feet before ordering to confirm fit. Is the light bar included? No. These brackets are sold as a mounting solution only — you'll need to supply your own light bar. What's included in the kit? A RIGHT and LEFT bracket along with mounting hardware. A shopping cart quantity of 1 = one complete kit (2 brackets) as well as hardware to mount the bracket to the cage.