CAMO DRIVE Collated Edge Screws

CAMO DRIVE Collated Edge Deck Screws install at an angle through the corner of the deck board, driving into the joist without ever passing through the visible top surface — the result is a completely fastener-free deck once the boards are down. Designed for use with the CAMO DRIVE stand-up tool and its Edge nose piece, these screws are collated in strips for continuous, efficient fastening rather than loading one screw at a time, and they work with treated wood, hardwood, composite, and PVC boards from 1" to 1-1/2" thick. A rake tip design bores directly into the board without pre-drilling, while a two-thirds reverse thread pulls the board material down tight to the joist as the screw sets, preventing mushrooming at the entry point for a clean, concealed hold. The T15 star drive trim head offers solid bit engagement and reduces cam-out during driving. Available in ProTech coated carbon steel for general use, or 316 stainless steel for coastal environments and high-moisture exposure. Each box contains 1,000 screws (20 strips of 50), covering approximately 285 square feet. Key Features: Installs through the board edge for a completely fastener-free deck surface Collated in 50-screw strips for continuous use with the CAMO DRIVE tool and Edge nose piece Rake tip bores directly into the board without pre-drilling Two-thirds reverse thread pulls board tight to joist and prevents mushrooming T15 star drive trim head for reduced cam-out and clean, concealed entry Compatible with treated wood, hardwood, composite, and PVC boards, 1" to 1-1/2" thick Available in ProTech coated steel or 316 stainless steel 1,000 screws per box (20 strips of 50); covers ~285 sq ft