CAM MOTION LS3 CAM- STAGE III - 03-01-0006

Grind # XA220/325-XA230/325-17+4  Duration at .050 - 220/230 Lift with 1.7 - .553/.553 Lobe separation 117 Intake center line 113   The LS3 Stage 3 camshaft was designed for enthusiast who want to increase power while maintaining excellent drivability and manners. This cams can be used with stock torque converters, stock rear gears, stock intake manifold, stock exhaust manifolds etc. However, additional performance gains can be realized when used with other performance modifications. The Stage 3 LS3 camshaft is the largest camshaft that we recommend with the stock torque converter. This Cam Motion hydraulic roller cam delivers mild performance idle, excellent low end torque, and extended RPM capabilities over the stock camshaft. This cam will work well as a performance replacement for Camaro, Corvette, and other passenger cars needing more power without poor gas mileage associated with the larger cams. Cam Motion designed this as a "drop in" type cam with minimal vehicle modifications. These cams are designed to be compatible with the Chevrolet Performance beehive valve springs or performance aftermarket .600" lift beehive springs. This camshaft can be used with stock, existing lifters, but used lifters should be inspected for wear, damage or irregularities that could damage your new camshaft.   Part Number 03-01-0006 Cam Type Naturally Aspirated Brand Cam Motion Engine Type Gen III/Gen IV Cam Style Hydraulic Roller Lift .553/.553 Duration 220/230 Lobe Separation Angle 117+4   *Item ships directly from vendor.