EV Brake Caliper DIY Custom Paint Kit with Pro-Grade 2k High Temp Catalyzed Urethane

Electric vehicle brake calipers require a proper high-temp resistant and catalyzed paint to endure the rigors of the extreme braking environment.   EV Sportline has led the market in offering bespoke custom painted paint caliper services at our facilities in Los Angeles and Atlanta.  This DIY caliper painting kit was developed to enable you to safely and successfully paint your calipers at home.  The kit has been thoughtfully curated to include everything needed to properly clean, prep, mask, and paint all four calipers.  The include caliper paint is a 2k (two-part) catalyzed high-temp rated professional-grade paint.  The aerosol spray can features an integrated catalyzer component which is activated using the cap plunger.  The premium spray nozzle deliveries an optimal pattern for painting calipers.  The professional 2k paint requires the use of a protective breathing respirator, which is included.  Due to the permanent nature of the paint, we provide a full vehicle cover to ensure no overspray bonds to the underlying vehicle.    The EV Sportline DIY caliper paint kit is perfect for personalizing your calipers in red or black.      What is Included in the Kit: Prep-clean brake dust and grease removing wash soap Non-Chlorinated Aerosol Brake caliper cleaner      Microfiber cleaning towels (2) Stainless steel cleaning brushes (2) Surface prep scuff pads (2) Disposable vehicle covering masking wrap Painters masking tape roll Protective disposable painting gloves Protective breathing respirator Surface adhesion promoting prep spray 2K catalyzed aerosol high-temp brake caliper paint (1 can) – enough to completely paint 4 calipers Note: paint must be used within 1hr of activating 2K catalyzer (leftover paint will harden in the can)   Note - Extra cans of paint are available separately     Compatibility: Approved for use on all electric vehicles, including Rivian R1T or R1S Tesla Model 3, Y, S, X, Cybertruck Ford MachE, Lightning  Lucid Air  Porsche Taycan Polestar Kia EV6 Hyundi Ioniq and more! Suitable to paint over factory caliper paint, powder coat, or raw finishes Suitable for all other non-EV brake calipers as well   Specifications: 2k Catalyzed Urethane High-Temp Caliper Paint Available Colors: Black or Red Material volume: 11.6 oz / 330 grams per can Made by Team1EV.com for EV Sportline Longevity: Permanent   Recommendations:  While it is not absolutely necessary, we recommend removing the caliper from suspension upright, but not removing the caliper from the vehicle (no need to disconnect the brake line).  Subsequently, removing brake pads from the caliper will allow cleaning all caliper surfaces and is also recommended.   While paint will not harm caliper seals, we recommend masking off caliper pistons, seals, bleeder screws, and brake lines for a professional finish.  Do not paint brake rotors or brake pad friction surfaces – mask these surfaces off.   If calipers are unbolted, be careful not to overly bend, kink or pull on brake lines.  Calipers should never ‘hang’ using brake lines.