Cable Railing Arcadia Fascia Mount Post

The Cable Railing Arcadia Fascia Mount Post is part of Inline Design’s Arcadia Press & Latch Cable Railing System. This fascia-mounted system is designed for commercial and high-end residential cable railing projects where the post attaches to the side face of the structure and a stronger, welded top-rail assembly is preferred over a fully modular railing layout. The Arcadia system is not a modular plug-and-play system. It is a project-oriented railing system with pre-drilled posts, fascia mounting plates, and Press & Latch cable fittings supplied according to the selected post type. The top rail bar is intended to be welded. Use it for decks, balconies, terraces, stairs, landings, commercial spaces, and high-end residential projects when installed according to local code, approved fascia mounting conditions, cable spacing requirements, top rail requirements, and project-specific engineering. Quick Product Highlights Arcadia Series Commercial and high-end residential cable railing post system with welded top rail design intent Fascia / Side Mount Mounts to the side face of the structure using the included Arcadia fascia plate Press & Latch Fittings Includes cable tensioners, terminals, or both depending on the selected post type Cable Size Options Available for 1/8" or 5/32" stainless steel cable layouts Heights 36" and 42" post height options Important Cable wire, welded top rail bar, and fascia mounting anchors are not included unless purchased separately or quoted separately Project Gallery Projects Gallery Sedona, AZ Details System Arcadia Press & Latch Cable Railing System Mount Type Fascia mount / side mount installation System Type Non-modular Arcadia system for commercial and high-end residential projects Top Rail Top rail bar is intended to be welded. For an extra fee, a steel top plate can be welded on to support a wood handrail; speak with Inline Design sales for details. Cable Thickness Options 1/8" and 5/32" Post Preparation Post is pre-drilled for the selected Arcadia cable railing configuration Material AISI 316 stainless steel Finish Standard ASTM A480 No. 4 linearly textured satin finish Typical Applications Commercial decks, high-end residential balconies, stairs, terraces, and cable railing projects requiring fascia mounting and a welded top-rail configuration Available Configurations Heights 36" and 42" Cable Thickness 1/8" and 5/32" Post Types Middle, Tensioner, Terminal, Outside Corner, and Middle Extension What Is Included in the Kit? Post (1) pre-drilled Arcadia fascia mount post Fascia Plate (1) Arcadia fascia plate included with the selected post configuration Included Press & Latch Cable Fittings by Post Type Middle Post Pass-through post layout; no terminal/tensioner set included unless specified by the selected configuration 36" Tensioner Post (10) Straight Tensioners 42" Tensioner Post (12) Straight Tensioners 36" Terminal Post (10) Straight Terminals 42" Terminal Post (12) Straight Terminals 36" Outside Corner Post (10) Straight Tensioners and (10) Straight Terminals 42" Outside Corner Post (12) Straight Tensioners and (12) Straight Terminals 36" Middle Extension Post (10) Straight Tensioners and (10) Straight Terminals 42" Middle Extension Post (12) Straight Tensioners and (12) Straight Terminals Important Installation Notes Stainless steel cable wire is not included. Cable must be ordered separately based on project length, cable size, and layout. Top rail bar is not included. The Arcadia system is designed around a welded top rail bar, and the top rail must be supplied and installed according to the project design. Fascia mounting anchors are not included. Due to the variety of fascia conditions, customers must supply the appropriate connecting hardware for the fascia plate, including screws, bolts, anchor bolts, or other project-specific fasteners. For substrate-specific fastener guidance and recommended approaches, see Anchoring Options for Railing Posts. Anchor selection must be based on the mounting surface, including fascia framing, concrete, steel, wood blocking, or other approved structural substrates. Welding is required for the Arcadia top rail bar and should be performed by a qualified fabricator or installer. Stair posts and other custom posts require an additional fee to account for custom post fabrication and CAD drawings specific to the customer field measurements when necessary. Custom fabrication requires a minimum of 1–2 weeks for production. Cable spacing, post spacing, welded top rail continuity, guardrail height, fascia plate location, anchoring, and other structural requirements must be verified against local code and project-specific engineering. For coastal or high-corrosion environments, stainless steel must be cleaned and maintained regularly. Links & Downloadable Materials 36.5" Post Dimensional Drawing 42.75" Post Dimensional Drawing Fascia Bracket Dimensional Drawing Cable Tensioner / Terminal Dimensional Drawings Mounting Options Anchoring Options for Railing Posts