C.A. Technologies FE-Line LCFM (Low CFM) HVLP Pressure Feed Spray Gun - CAT Pack

The Finish Excellence (FE-Line) LCFM HVLP model (FE-LCFM) is our low CFM lightweight ergonomic spray gun option. The FE-LCFM spray gun provides good atomization for portable applications.  The FE-Line LCFM’s standard setup is a 1.3 mm (fluid nozzle) x 1090 (air cap). This setup is designed for use with a low air consumption compressor with an output of 6 to 10 cfm. The 1090 air cap only uses 6 cfm, which enables the gun to be operated with a 2 HP compressor. The FE-LCFM is a great option for those looking for portability and the right equipment to use for onsite finishing projects! Specifications: The FE-LCFM HVLP Pressure Feed Spray Gun CAT Packs include two air caps (1090 – 6 cfm & 1094 - 13 cfm) along with several different needle and nozzle sizes (0.8 mm, 1.3 mm & 1.7 mm), multi-purpose wrench, ratchet wrench with 3/8" socket, cleaning brush and your choice of no cup (Smart Pack), for use with an existing 2 Qt. remote cup or pressure tank, an aluminum 1 Qt. pressure feed cup with regulator or the 3M PPS Cup System 1 Qt. pressure feed cup with regulator all contained in a handy carrying case. Nozzle sets ranging from 0.5 mm – 1.7 mm Air Inlet - 1/4” NPS (m) Fluid Inlet – 3/8” NPS (m) Weight – 15 oz. Required atomizing air pressure may vary as required by air cap (15 psi - 33 psi) Required atomizing air volume is 6 – 13 cfm dependent on the air cap The air volume requirement (CFM) is dependent on Air Cap (21-1090 Low CFM air cap requires 6 cfm @ 15 psi)    Additional Features & Benefits: The FE-LCFM offers stainless steel wet parts however it does not have the stainless steel sleeve inside the aluminum gun head which is most desirable with any water-base stain, coating, or adhesive. *(Please note that the repair kit for the FE-LCFM is part # 10-140.  For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).   Part Sheet – FE-Line LCFM (FE-LCFM)