AutoMeter BVA-300PR BVA-300 Intelligent Hand-Held Tester/Analyzer Combo with PR-20 Printer

AutoMeter BVA-300PR BVA-300 Intelligent Hand-Held Tester/Analyzer Combo with PR-20 Printer   Combo Kit includes BVA-300 Electrical System Analyzer with PR-20 Thermal Printer   The BVA-300 is a Technician grade handheld electrical system tester that preforms a compete electrical system test in less than 82 seconds. Utilizing an on-board 40 amp load, the BVA-300 uses patented Digital Pulse Load technology to fully test most batteries, starters and alternators completely.   - Best of Both Worlds - Accuracy via Patented Resistance & Load Test - Tests flooded and AGM batteries - Tests 6 And 12 Volt Batteries - Tests CCA Range of 100-1600 - Temperature Added For Accuracy - Fully Automated Load - Tests discharged battereis - Easy Input Menus - Tests starter draw and alternator output - Stores the last 50 tests in memory - Reverse polarity protection - 64 character 4 line LCD screen - 30"" - 16 gauge leads - Tough plastic case with easy-grip rubber boot - Customer communication with optional bolt-on PR-20 printer or PR-12 infrared printer or PC cable Features - Tests flooded, deep cycle, and AGM batteries with CCA range of 100-1600 - also detects discharged batteries, bad cells, and has built in reverse polarity protection. - Unlike competitor models, AutoMeter testers only require a single technician to run a full electrical system test due to our on-board 40 amp True Load cell. This eliminates the need to apply inconsistent loads, such as headlights, fans, etc. which makes our products easier to use and more accurate. - Automatically stores the last 100 tests in memory. - 30" - 16 gauge leads with professional grade clamps that are easily field serviceable. - Customer communication with optional PR-12 (external printer), PR-20 (bolt-on printer), or AC-12 (PC cable). - English and Spanish language menus and test results. - Perfect tool box tester! Rugged engineered composite housing with protective rubber boot for years of service. - Intuitive menu driven operation, transmitted via back lit LCD screen for ease of use. - Utilizes advanced Digital Pulse Load (DPL) technology - patented test process and algorithm allowing operators of this product to rapidly measure a battery’s ability to provide adequate cranking power necessary to start the vehicle without the need for time consuming manual electrical system load tests - Battery test results include: Measured true CCA, voltage and percent of charge, and the battery's state of health (good, near end of life, or bad). Specifications Battery Types: Flooded & AGM Battery Voltage: 6V & 12V Battery Range: 100-1600 CCA Automated Load: 40 Amp Lead Size: 30” - 16 Gauge Alternator Test: Yes Stator Diode Test: Yes Starter Draw Test: Yes Voltage Drop Test: None External Volt Leads: None Memory: 100 Tests Operational Temperature: 0-120F Operational Humidity: 0-85% Language: English & Spanish Internal Battery: 9V Dimensions: 4.5” x 7.1” x 1.4” Weight: 1.3 lbs California Residents: Prop 65 WARNING Warranty: 12 Months PR-20 Printer Information The PR-20 is an add-on thermal paper printer for all AutoMeter portable handheld testers. The PR-20 attaches directly to the tester and features a protective boot for long service life.   - Add on thermal paper printer for all AutoMeter portable handheld testers. - Attaches directly over the tester and is held in place by a rubber protective boot. - Easy drop in paper replacement - uses standard 58mm thermal paper. - Runs on a 7.4 V Li-Ion camcorder rechargeable battery (AC-113) (Typical battery life: 6000 print lines - 2 hour recharge time) - Includes battery charger and battery charges while installed in unit.   Weight: 2 lbs Warranty: 12 Months  Information Downloads BVA-300 Operator Manual PR-20 Printer Operator Manual