AutoMeter BUSPRO-660 AGM Optimized 12V/5A 6-Station Smart Battery Charger - 120VAC

AutoMeter BUSPRO-660 AGM Optimized 12V/5A 6-Station Smart Battery Charger - 120VAC   BUSPRO-660 model multi-station 5 amp smart battery chargers for vehicles that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specifically designed for the proper and safe charging and maintenance of AGM batteries which makes overcharge impossible. The flexible BUSPRO system has six 5 amp transformer stations which can be split out to double the charger’s capacity at a lower 2.5 amp charge rate if bringing up the charge on the batteries more slowly is desired. The charging current provided by each station is also micro-controlled and helps remove sulfation from batteries connected to the BUSPRO-660 unit.   - 120 volt, 6 channel 5 amp smart charger - AGM Optimized – AutoMeter’s engineers have worked closely with the leading Absorbent Glass Mat (AGM) battery manufacturers to develop the most effective and efficient charging practices for this unique battery type. Products featuring the AGM Optimized feature set are preconfigured to work with AGM batteries, resulting in quicker charges with significantly reduced chance of battery damage.  - Capable of being mounted on a shop wall to help reduce clutter and free up vital floor space. Heavy duty wall mounting brackets and 6' leads per channel come standard. - Includes six 5 amp transformer stations which can be "doubled up" for quicker 10 amp charging to save time or split out to double the charger’s capacity at a lower 2.5 amp charge rate. - Charging at each station is micro-controlled and helps remove sulfation from batteries connected to the BUSPRO 660 unit. - Up to three BUSPRO units can be daisy chained to one another via integrated 3 prong power outlet on unit, utilizing only one wall outlet. - Completely automatic "smart" charging with advanced circuitry enables station independent, safe charging that automatically adjusts the voltage/current relationship in order to maintain the battery at full charge.   Utilizes two LED lights per channel to visibly indicate: 1. Red light = Charging - The Professional Charger is delivering up to a 5 Amp charge. 2. Red Light Flashing = Defective Battery: The charger is designed to detect either a sulfated battery or a bad cell. Make sure the battery posts and clamps are clean. If the red light continues to flash the battery should be replaced. 3. Red & Green light = Finishing Full Charge. “Ready for Load Test”: The battery is at least 70% charged and ready to load test and return to service. Continued charging will take the battery to full charge. 4. Green light = Charged and Maintaining: The charger is safely adjusting the voltage/current relationship to maintain the battery at a full charge. The battery can be load tested. If the battery voltage drops below 12.5 volts, the charger shifts automatically into (Red Light) Charging Mode. Specifications Total Amps: 30 amps Outputs: 6 Amps Per Output: 5 amps DC Leads: 6 ft / 18 AWG AC Input: 100-130 VAC Hertz Input: 50/60 AC Draw: 7.5 amps Battery Voltage: 12 volt Dimensions: 3.25” x 8” x 26” Weight: 31 Lbs CEC Compliant: No California Residents: Prop 65 WARNING Warranty: 12 Months Information Downloads BUSPRO Series Manual BUSPRO Wall Mounting Instructions