AutoMeter BUSPRO-600S Multi-Battery 12V/5A 6-Station Smart Battery Charger - 120VAC

AutoMeter BUSPRO-600S Multi-Battery 12V/5A 6-Station Smart Battery Charger - 120VAC   BUSPRO Series chargers utilize individual transformers and microprocessors for both low and high volume battery charging applications. This allows each channel to work independently and charge the battery correctly and in a timely manner. The BUSPRO-600S has a 5 amp per channel maximum with a 110 volt AC input. This unit has two LED lights per channel to visibly indicate whether the unit is connected, charging, topping off, completed charging, or a bad or reverse connection. The BUSPRO-600S prevents overcharging and removes sulfation by means of a micro-controlled pulse current.    - 5 amp per channel maximum with a 120 volt AC input. - 6 charging stations which are ideal for commercial businesses needing to charge multiple batteries at once. - Capable of being mounted on a shop wall to help reduce clutter and free up vital floor space. Heavy duty wall mounting brackets and 6' leads per channel come standard. - Will not overcharge/overstress battery. - Up to three BUSPRO units can be daisy chained to one another via integrated 3 prong power outlet on unit, utilizing only one wall outlet. - Completely automatic "smart" charging with advanced circuitry enables station independent, safe charging that automatically adjusts the voltage/current relationship in order to maintain the battery at full charge.    Utilizes two LED lights per channel to visibly indicate: 1. Red light = Charging - The Professional Charger is delivering up to a 5 Amp charge. 2. Red Light Flashing = Defective Battery: The charger is designed to detect either a sulfated battery or a bad cell. Make sure the battery posts and clamps are clean. If the red light continues to flash the battery should be replaced. 3. Red & Green light = Finishing Full Charge. “Ready for Load Test”: The battery is at least 70% charged and ready to load test and return to service. Continued charging will take the battery to full charge. 4. Green light = Charged and Maintaining: The charger is safely adjusting the voltage/current relationship to maintain the battery at a full charge. The battery can be load tested. If the battery voltage drops below 12.5 volts, the charger shifts automatically into (Red Light) Charging Mode. Specifications Total Amps: 30 amps Outputs: 6 Amps Per Output: 5 amps DC Leads: 6 ft / 18 AWG AC Input: 100-130 VAC Hertz Input: 50/60 AC Draw: 3.75 amps Battery Voltage: 12 volt Dimensions: 3.25” x 8” x 26” Weight: 31 Lbs California Residents: Prop 65 WARNING Warranty: 12 Months Information Downloads BUSPRO Series Manual BUSPRO-600s Manual - Spanish BUSPRO Wall Mounting Instructions