Bullet Series 50 Cal. Linear Actuators

Description The Bullet Series 50 Cal. Linear Actuator was developed to have a slim, in-line motor design. These units have built-in hall effect sensors, which allow for synchronization, position, and speed control. The Hall effect feedback is vital to applications where multiple actuators must travel in sync. Popular within robotics, manufacturing, marine, off-road vehicles, and home automation. *674 lbs will no longer be available once sold out. *Product is now manufactured in silver To synchronous 2 or more actuators together to run at exactly the same speed, we recommend our Control board FCB-1 for the ultimate Actuator control.  This gives you complete actuator control including adjusting limits, speed, and even a series of timer functions to be able to time when an Actuator opens and closes. CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings (below) or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino.  Tech Note: Hall Effect Sensors were modified between 2020 and 2021 production runs; previous HE Sensors had 12 magnet pairs, the current HE Sensor has 3 pairs. Please reference our Hall Effect Sensor Tutorial for PLC programming. Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies  Specifications FA-BH50-500-12-(S) FA-BH50-500-24-(S) FA-BH50-674-12-(S) FA-BH50-674-24-(S) FA-BH50-1124-12-(S) FA-BH50-1124-24-(S) Push/Pull Force 500 lbs. 500 lbs. 674 lbs. 674 lbs. 1124 lbs. 1124 lbs. Static Force 800 lbs. 800 lbs. 808 lbs. 808 lbs. 1348 lbs 1348 lbs. Speed at full load ("/s) 0.36 0.36 0.145 0.145 0.08 0.08 Gear Ratio 51:1 51:1 50:1 50:1 100:1 100:1 Voltage 12V 24V 12V 24V 12V 24V Max Current at full load 10A 5.5A 5.44A 2.72A 7.26A 3.63A Number of Hall magnet 3PPR 3PPR 3PPR 3PPR 3PPR 3PPR Pitch of Leadscrew P4.0*1T P4.0*1T P2.5*2T P2.5*2T P2.5*1T P2.51T Revolutions per inch stroke (25.4mm) 6.35  6.35 5.08 5.08 10.16 10.16 Hall Sensor pulses per revolution 153PPR 129PPR 417PPR 417PPR 417PPR 417PPR Duty Cycle 10% 1 min on and 10 min rest at full load Operating Temp. Range -4°F to 149°F (-20°C to 65°C) IP Rating 66   No Load Noise Level 50-70 dB Diameter 1.97" (50mm) Outer Housing Material Aluminum 6061 Expansion Rod Material Stainless Steel 304 Limit Switch  Built-In non-adjustable - For adjustable limit switch, try our new Adjustable Limit Switch Actuators  Feedback Hall Effect Sensor  Hall Sensor Pulses per inch of travel 500 lbs: 971 p/in 674 lbs: 2,115 p/in 1124 lbs: 4,235 p/in Hall Sensor Pulses per mm 500 lbs: 153 p/mm 674 lbs: 333 p/mm 1124 lbs: 667 p/mm Feedback Voltage 5V Synchronous Capability  Yes, with our Sync Control Board or a  Microcontroller Cable Length 1.5 feet Wire Gauge 18AWG Motor, 22AWG Sensor Brackets MB50 , MB50C or MB50U Stroke Length Retracted Length Extended Length Weight (lb) STEP File 6" 18.21" 24.07" 4.85 FA-BH50-(F)-(V)-6 8" 20.18" 28.01" 5.25 FA-BH50-(F)-(V)-8 10" 22.14" 31.95" 5.6 FA-BH50-(F)-(V)-10 12" 24.11" 35.88" 5.95 FA-BH50-(F)-(V)-12 18" 31.99" 49.66" 7.25 FA-BH50-(F)-(V)-18 24" 37.89" 61.47" 8.15 FA-BH50-(F)-(V)-24 30" 45.77" 75.25" 9.45 FA-BH50-(F)-(V)-30 36" 51.67" 87.07" 11.1 FA-BH50-(F)-(V)-36 40" 55.61" 94.94" 11.35 FA-BH50-(F)-(V)-40 Technical Drawings Curve Graphs Product Video Bullet Series 50 cal. Review Comparison Video Bullet Series 50 cal. vs 30 cal. 3D Model Downloads (.STEP) 674lb and 1124lb Force 6 Inch Stroke 8 Inch Stroke 10 Inch Stroke 12 Inch Stroke 18 Inch Stroke 24 Inch Stroke 30 Inch Stroke 36 Inch Stroke 40 Inch Stroke Wiring Diagram Click here to view our wiring diagram generator to help you set up your actuator system Wiring Diagram Generator Downloads Tech Drawing