Bullet Series 36 Cal. Linear Actuators

-Tech Drawing Description The Bullet Series 36 Cal. Linear Actuator was developed to have a slim in-line motor design. Includes built-in hall effect sensor, which allows for synchronization, position and speed control. The Hall effect feedback is vital to applications where multiple actuators must travel in sync.  *Product is now manufactured in silver To move between two and four actuators in synchronous we recommend our dedicated control board, the FCB-1.   CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings down below or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino.  Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies  Works perfectly with Control board FCB-1 for the ultimate Actuator control, to give you complete actuator control including adjusting limits, speed, and time functions.  Specifications FA-BH36-224-12-(S) FA-BH36-224-24-(S) Push/Pull Force 224 lbs. 224 lbs. Static Force 268 lbs. 268 lbs. Speed at full load - Use FCB-1 for speed adjustment 0.157”/sec 0.157”/sec Gear Ratio 100:1 100:1 Voltage 12V 24V Max Current at full load 3A 3A Duty Cycle 25% at 100% load. Max. 5 mins continuous use Operating Temp. Range -4°F to 149°F (-20°C to 65°C) IP Rating 66  No Load Noise Level 50-70 dB Diameter 1.42" (36mm) Outer Housing Material Aluminum  Expansion Rod Material Stainless Steel 304 Limit Switch  Built-In non-adjustable unless you use FCB-1 controller Feedback Hall Effect Sensor Hall sensor Pulses per inch of travel 1,828 (72 pulses per mm of travel) Number of Hall Magnet 3PPR Pitch of leadscrew P2.5*2T Revolutions per inch stroke  0.2" (5.08mm)  Stroke per Revolution of the Leadscrew. (5 revolutions per Inch of travel) Hall sensor pulses per revolution of Leadscrew 360PPR Feedback Voltage 5V Synchronous Capability Yes, with our Sync Control Board or a  Microcontroller Cable Length 1.5 feet Wire Gauge 18 AWG Motor, 20AWG Sensor Brackets MB36 , MB36C, MB36SM Stroke Length Retracted Length Extended Length Weight (lb) STEP File 6" 16.34" 22.26" 2.4 FA-BH36-224-(F)-6 8" 18.30" 26.20" 2.6 FA-BH36-224-(F)-8 10" 20.27" 30.27" 2.7 FA-BH36-224-(F)-10 12" 23.42" 35.25" 3.15 FA-BH36-224-(F)-12 14" 25.24" 39.19" 3.4 FA-BH36-224-(F)-14 18" 30.15" 48.24" 3.95 FA-BH36-224-(F)-18 22" 34.45" 56.12" 4.05 FA-BH36-224-(F)-22 24" 36.45" 61.12" 4.25 FA-BH36-224-(F)-24 Technical Drawings Curve Graphs Product Video Bullet Series 36 Cal. review Comparison Video Bullet Series 36 cal. vs 50 cal. 3D Model Downloads (.STEP) 6 Inch Stroke 8 Inch Stroke 10 Inch Stroke 12 Inch Stroke 14 Inch Stroke 18 Inch Stroke 22 Inch Stroke 24 Inch Stroke Wiring Diagram Click here to view our wiring diagram generator to help you set up your actuator system Wiring Diagram Generator