Bubble Gum 651

Description: 2.5-mil, intermediate calendered PVC film with excellent dimensional stability and very good cutting and application characteristics. Release Liner84# custom silicone-coated paper with special release characteristics that provide excellent weeding and release values. This is medium-term indoor and outdoor lettering, marking and decoration. Technical DataThickness (without liner and adhesive) 2.5-milDimensional Stability(FINAT TM-14) Adhered to steel, no shrinkage in cross direction; In length, <.016”Temperature ResistanceAdhered to aluminum, -40°F to +176°F, no variationFire Behavior(DIN 75200)Fire RatingAdhered to steel, self-extinguishingASTM E 84-07 Class “A”Adhesive Power(FINAT TM-1, after 24 h, average)Adhered to stainless steel: 4.1 lb/inTensile Strength(DIN EN ISO 527)Along: Min. 19 MPaAcross: Min. 19 MPaElongation at Break(DIN EN ISO 527)Along: Min. 130%Across: Min. 150%Seawaterability (DIN 50 021)Adhered to aluminum, after 100h/73°F, no variationShelf Life (68°F/50% relative humidity) 2 yearsMinimum Life Expectancy (based on accepted application procedures on vertical surfaces) 6 years -colors/transparent/black and white4 years -metallic 3 years Minimum Application Temperature 46°F Note: Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Approximately 12"x12"