Bruker TITAN Handheld XRF Analyzer

Available to purchase or to rent. The price shown below is the weekly rental rate. Purchase pricing and other rental terms are quoted by a representative — call 1-800-468-8921 or use the CONTACT US button above. This analyzer cannot be bought or rented online. The Bruker TITAN is a rugged handheld X-ray fluorescence (XRF) analyzer that determines a material's elemental composition in seconds, without destroying the sample. It reads sodium (Na) through uranium (U) and handles solids, powders and liquids, which makes one instrument workable across incoming material checks, finished goods and in-process parts. The detector is a silicon drift detector with a graphene window — the graphene matters because it passes low-energy X-rays that a thicker window would absorb, which is what gives the TITAN its light-element sensitivity. Bruker's SharpBeam™ tube geometry and an automated small-spot collimator keep readings repeatable on small or irregular features, and a dual view/aiming camera system shows you exactly what the beam is on. At 1.7 kg (3.7 lb) with the battery in and rated IP64 against dust and splashing, it is built to be carried through plant and field conditions rather than babied between measurements. Applications Positive material identification (PMI) — verify alloy grade on incoming stock, installed piping and finished parts before they move down the line. Scrap metal sorting and recycling — rapid grade separation at the pile, where throughput matters more than laboratory precision. Geochemistry, mining and ore grade control — field and core-shack analysis for exploration and grade decisions. Precious metals and jewelry verification — non-destructive confirmation of karat and composition. Regulatory screening — RoHS and CPSIA compliance checks on components and consumer goods. Soil, fertilizer and plant material screening — elemental screening for environmental and agronomic work, including food quality and safety applications. Key features Sodium to uranium element range — one of the widest ranges available in a handheld, covering light elements most units miss. Graphene-window silicon drift detector — 20 mm² area, typical resolution under 140 eV at 800,000 cps. SharpBeam™ optimized tube geometry — more counts on the sample for a given tube power, so measurements finish faster. Automated collimator and motorized 5-position filter wheel — spot size and beam filtering switch under software control, not by hand. Dual camera system — a 1 MP auto-zoom view camera plus a fixed aiming camera, on a 4.3-inch capacitive touchscreen. IP64 and 3.7 lb with battery — dust and splash resistant, rated from 14°F to 122°F, with 30-second hot-swap batteries. Full technical specifications are in the spec sheet: SPECS MANUAL Purchase or rental This analyzer is available either to buy or to rent. Both are arranged by phone rather than through the cart. Rental — the price on this page is the weekly rate. Daily and monthly rates are also available; ask when you call. Purchase — quoted per configuration. Published specifications describe the highest available configuration, and the actual build varies with the model and options selected, so pricing follows the configuration. XRF instruments generate ionizing radiation and are subject to radiation-device registration and operator training requirements that vary by state and by country, and they cannot be supplied into every region. Call 1-800-468-8921 or use the CONTACT US button above, and a Geotech representative will confirm configuration, pricing, licensing and availability for your location.