Bright Teal - Reflective Vinyl

This listing is for our Reflective Vinyl All of our sheets of vinyl are compatible with most types of cutting machine including but not limited to Cricut Explore, Silhouette Cameo, any other die cutting machine, and professional and commercial grade vinyl cutters. ★★Reflective Vinyl★★ ★Self Adhesive ★Gloss Finish with Reflective Properties ★ ★4.5 Mils Thick ★Rated for 7 Years Outside Use ★Not recommended for use on walls or with detailed cuts ★★★★★★★★★★★★★★★★★ TYPES OF ADHESIVE: Sheeting is pre-coated with PS adhesive that will bond the sheeting to the substrate with the application of pressure only. The pressure can be applied with a hand roller, squeegee, or a roller-applicator. Permanent bonding will not take place until 48 hours after the application. DO NOT ALLOW THE ADHESIVE TO FREEZE DURING THE 48-HOUR CURING PERIOD. DURABILITY: The most important properties of retroreflective sheeting are reflectivity, color, and durability. Of these, durability may be the most important, so special attention was directed towards the selections and use of raw material and production technology that would render maximum durability. From countless tests conducted, it has been determined that, applied as recommended, Reflective Vinyl can be expected to meet the durability standards given below without any clear coating. Under certain weathering conditions, small hair cracks may appear in the sheeting, but such cracks do not significantly reduce the day or night performance of the signs. Engineering Grade (EG) sheeting is designed and manufactured to render high head-on and wide-angle retroreflectivity. Each color has a 7 year durability rating. APPLICATION: Pre-coated with an adhesive that will bond the sheeting firmly and permanently to clean and smooth surfaces of tested and approved metal, coated metal, plastic, plywood, etc. STORAGE AND SHELF LIFE: Must be stored in a cool, dry, and clean area. Avoid exposure to direct sunlight and storage in excessively humid areas. The shelf life of the sheeting is 12 months after delivery. MAINTENANCE: Surfaces covered with dust or small particles of sand should be cleaned with water containing a mild, neutral cleaning solution. To avoid scarring the surface use a soft, clean cloth or sponge when washing and drying. To remove tar and oily substrates, rub lightly with a soft cloth soaked with a mild solvent such as kerosene or turpentine. ★★★★★★★★★★★★★★★★★ Specialty vinyl behaves slightly different than standard vinyl. We recommend to always perform a test cut and take your time when working with these materials. These factors will vary based on your machine settings, but in general specialty vinyl tends to be more difficult to weed. Because of this, we recommend reverse weeding when working with specialty vinyl. Our tutorial on how to reverse weed can be found on our tutorial page (link is at the bottom of this section). We are not responsible for issues with equipment, settings, or other errors. ★★★Please visit http://howto.smashinginkvinyl.com for instructions, tutorials, and recommendations for using our products.★★★★★★★★★★★★★★★★★ ★★★ Colors may appear different than actual colors based on screen and monitor settings. Actual sheets may vary +/- 1/4" in size. Sheets are pre-cut. If you order multiple sheets, they will come as individual 12x12 sheets. ★★★★★★★★★★★★★★★★★ Check out our adhesive vinyl in other colors and styles! http://smashinginkvinyl.com/86-adhesive-vinyl