Brick Face Extension for Arlo Essential Wired Video Doorbell (AVD1001) (2020) | Custom Depth | Extend to Face of Bricks

Brick Face Extension for the Arlo Essential Wired Video Doorbell (AVD1001) (2020) — Custom Depth, Flush Brick Install ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee Brick Face Extension Engineered for the Arlo Essential Wired Brick installs where the doorbell sits RECESSED behind the brick face? The Brick Face Extension bridges the gap from your trim/recessed surface UP TO the face of the brick so the Arlo Essential Wired sits flush with the brick face — not buried in a recess and not sticking out past the brick. Engineered for the Arlo Essential Wired Video Doorbell (AVD1001) (a wired (16-24V AC) doorbell). Custom-cut depth from 1-1/2" up to 8" in 1/8" increments. Slim 9/16" base anchors in your wood trim. 3D-printed to-order in the USA from UV-stable PETG, freeze-tolerant. Free shipping on orders over $100, ships in 2-3 business days, Replacement Guarantee covers a depth swap if your measurement is off. How to measure: Measure from your trim/mounting surface straight out to the face of the brick. Subtract 1 inch (the depth of the doorbell body) and order that variant so the doorbell face sits flush with the brick face. Example: 3" gap → order the 2" extension (the default). For maximum accuracy subtract 1" (doorbell) + 1/4" (adapter bracket). Compatibility — Custom-Cut for the Arlo Essential Wired Video Doorbell (AVD1001) This Brick Face Extension is custom-cut for the Arlo Essential Wired Video Doorbell (AVD1001) — Amazon ASIN B07YMV9VMT. Does NOT fit: other Arlo doorbell models with different mounting backs, or any non-Arlo video doorbell. Each major doorbell body has its own dedicated brick face extension on our store. Not sure which Arlo model you have? Send a photo of the back of your doorbell to shop@doorbellmount.com — we’ll confirm fit before you order. Don’t have the doorbell yet? Buy the Arlo Essential Wired Video Doorbell (AVD1001) on Amazon → Brick Face Extension — When Your Doorbell Sits Behind the Brick Face Brick Face Extension is the right pick when your doorbell would otherwise sit RECESSED behind the brick face (your trim is set back from the brick, so the doorbell ends up looking at the side of a brick). This bracket extends from the trim/recessed mounting point UP TO the brick face so the doorbell sits flush. Pick the right offset for your install: Use Brick Face Extension ($30-$110) when the doorbell would be recessed BEHIND the brick. Use Standard Offset ($38-$120) to clear a storm door or trim when the doorbell sits at or proud of the brick face. Use Full Offset ($50-$140) for maximum projection past brick edges. Brick Face Extension Dimensions & Material Front Face Width: Sized to fit the Arlo Essential Wired mounting back exactly Base Width: 9/16 inch (slim profile, fits within standard wood trim) Projection Depth: Custom-cut from 1-1/2 inch up to 8 inches in 1/8 inch increments Pricing: Scales with depth from $30 to $110 Base Mounting: 2 holes, anchor in WOOD TRIM with #6 screws (#2 Phillips driver) Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant Customization & Add-On Options Angled Trim? Use our Angle Shim Set (5°, 10°, 15°) ($5). Wire Hole Far From Brick? Add a Brick Bottom Filler Spacer Plate ($5-$10). Wrong Depth Ordered? Replacement Brick Extension ($25). Brick-Matching Color? Default ships in Black. For brick-matching prints (red, tan, gray) use the Color Change Request. Installing Your Brick Face Extension on the Arlo Essential Wired Prepare: Arlo Essential Wired requires 16-24V AC. Arlo Essential Wired requires 16-24V AC. Turn OFF power at the breaker before disconnecting wires. Route Wires: Lead the 16-24V wires through the rear of the brick face extension and out the front. Mount the Extension Base: Anchor the back over wood trim with 2 provided #6 wood screws using a #2 Phillips screwdriver. For depths over 3 inches OR battery models, also drive a brick-anchor screw through the optional offset hole into the brick face for extra stability. Attach the Mounting Bracket: Fasten the Arlo Essential Wired adapter bracket to the front using the 4 small #4 center screws. USE #1 Phillips PRECISION screwdriver. Connect the Doorbell: Strip wires (1/4 inch) and connect to the Arlo terminals. Polarity does NOT matter for AC. Secure and Finalize: Mount the Arlo Essential Wired to the bracket. Reinstall cover. Open the Arlo app, check Live View, redraw motion zones. FAQ — Arlo Essential Wired Brick Face Extension Will this Brick Face Extension fit the Arlo Essential Wired Video Doorbell (AVD1001)?Yes. The front-face mounting plate is shaped for the Arlo Essential Wired Video Doorbell (AVD1001) body (Amazon ASIN B07YMV9VMT, 2020). Other Arlo models with different bodies need their own brackets. How do I measure for the right depth?Measure from your trim/mounting surface straight out to the face of the brick. Subtract 1 inch (for the depth of the doorbell body) and order that variant. Example: 3" gap → order the 2" extension (default). For maximum accuracy subtract 1" (doorbell) + 1/4" (adapter bracket). How do the three brick mount types compare?Brick Face Extension ($30-$110) sits flush when the doorbell would be recessed behind brick. Standard Offset ($38-$120) clears storm doors and trim. Full Offset ($50-$140) projects further past brick edges. What if I order the wrong depth?Send us a picture before installing. Under our Replacement Guarantee, we will ship the correct depth at NO additional cost. Is the brick extension weatherproof?Yes — UV-stable PETG, freeze-tolerant. Real-world installs at 4+ years. Do I lose any Arlo features using this extension?No. The extension is a passive 3D-printed PETG part with no electronics. All Arlo Essential Wired features work exactly as on the stock plate. ✔ Replacement Guarantee — The Right Depth, Guaranteed Send a picture of your install area BEFORE you order. We’ll confirm the exact depth that fits. Need to Buy the Doorbell, Tools, or Caulk? Arlo Essential Wired Video Doorbell (AVD1001) (2020) — B07YMV9VMT #1 Phillips PRECISION screwdriver Clear outdoor silicone caulk Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. Questions? Need Help Picking the Right Depth? Email: shop@doorbellmount.com | Text/Call: 1-833-326-6868 Order your Brick Face Extension for the Arlo Essential Wired (2020) today — free shipping over $100, Replacement Guarantee included.