BRAVO Waterproof 10 | 10 Amp Waterproof PWM Solar Charge Controller | Waterproof 10A 12V PWM Solar Controller for RVs, Trailers, Campers, Vans, Boats, Off-Grid | #1 Waterproof Solar Controller

Features PWM technology, switching control by MOSFET Common Positive Grounding connection High efficiency and low power consumption Battery type setting via DIP switch Smart charging control Charging time management LED indication for the battery condition and charging status Thermal protection No sparks Waterproof Solid-duty cables Corrosion-resistant terminals and connectors. Conformal coating supplied to the inside board against moisture Includes a port for an external battery temperature sensor (BTS - optional) Suitable for most of the rechargeable Lead acid battery, including Flooded (WET), AGM, GEL, Lithium (LiFePO4) battery Designed according to CE standards, EMC, and FCC compliance Overvoltage protection, short circuit protection, reverse polarity protection Mounting the Device The quickest and easiest way to mount the unit is to use the three plastic spacers and self-tapping screws supplied and mount the unit to a flat surface. Specifications Electrical Parameters Rated solar panel amps: 10AMP Max. Normal input Solar cell array voltage: 15-22VDC Max. solar cell array voltage (output has no load): 25VDC Max. The controller's lowest operating voltage (at solar or battery side): 8VDC Min. Standby current consumption at night: 5mA Max. Maximum voltage drop-Solar panel to battery: 0.25VDC Max. Charging Characters Minimum battery start charging voltage: 3VDC Min. Soft start charging voltage: 3-10±0.2VDC Soft start charging current (50% PWM duty): Up to 5AMP Bulk charge voltage: 10-14±0.2VDC Equalization charging voltage at 25 ℃: 15.5±0.2VDC Equalization charging timer timed out: 2 Hours Battery temperature compensation coefficient: -24mV/°C Temperature compensation range: -20~+50°C Protection Over temperature protection during charging: 65°C Electrical Parts Input-output terminal: M5 terminals Physical Parameters Controller material: Plastic, Standard ABS Power terminal maximum stranded wire size: #10AWG stranded-5mm² Mounting: Vertical wall mounting IP grade: IP65 Net weight: Approx. 0.3kg/0.66lb Environmental Characteristics Operating temperature: -25~50°C(-13～122℉) Storage temperature: -40~85°C(-40～185℉) Operating Humidity range: 100% no condensation