Supernova E3/Schmidt SON tail light bracket - Large

sku # silver = SN-FS-L ****** Please note that these brackets now have a rougher finish - they almost look galvanized. The shiny finish was too hard to consistently obtain and was a serious bottleneck in our production.****** It has come to our attention that there is a new Supernova tail light that does not use the 50mm bolt spacing. If you have a Supernova tail light, make sure that your spacing is 50mm before ordering. While our tail light brackets were designed specifically for the contours of the Supernova E3 tail light, the 50mm hole spacing is an EU standard and works for a wide variety of lights, including many Busch & Müller tail lights and the Schmidt SON tail light for racks. Measure your light and if it has 50mm bolt spacing, it will likely work! Originally conceived for the Bullitt cargo bike, this large bracket for 50mm bolt spacing tail lights is designed to mount to the seat stay bridge. The length and bends position the light above the rear wheel and out of the heel-strike zone. Light bolt holes are M5. Attachment hole is M6. Made from highly weather resistant 5052 aluminum. Please note that the black version shown in the video is no longer available. If you are a bike shop or framebuilder with a business license and insurance, please contact us for information on wholesale prices. 29g - Weight is based on a representative sample. Actual weight may vary slightly. Made in Oregon, USA.