Tower Boom (W206, W207, W209)

Tower Boom (W206, W207, W209):  ** see below for sizing - please measure tower diameter before ordering! ***  The Barefoot International Tower Boom is a great tool for kids and adults, and works for a wide variety of watersports. The boom keeps riders up close near the driver or passenger and allows the boat to be driven at slower speeds. This helps beginners get their positioning right and get a feel for the water. More advanced athletes are also able to practice new tricks at a slower and safer speed.  The tower mounted boom mounts outside of the boat to a tubular section of the tower (tower must be tubular or at least have a section that is tubular) Once set up, you can easily move the boom to a stowed position by detaching the bow cable and pulling three quick release pins. Tech Specs and Summary: ONLY compatible with round(tubular) steel towers. Tower must have at least a section that is tubular. Main clamp and the 2 saddle clamps for the support arms will only fit tubing.  PLEASE CHECK THE DIAMETER OF THE TUBING BEFORE ORDERING!!   BOTH support arms must be used! Quickly moves to a stowed position by removing 3 quick release pins NOT compatible with Boom Extension(B110) or Height Adjuster(B107) Use Boom Handle(B111) to extend the boom if necessary Regularly apply clear silicone grease to the quick release pins to keep them working properly   You will need to know the diameter of the tubing on your tower before ordering  W206 = 2" (with bushings to fit 1-7/8") W207 = 2-1/2" (with bushings to fit 2-3/8" and 2-1/4") W209 = 3.0" (with bushings to fit 2-7/8" towers)   Barefoot International does not have a list of sizing for towers.