Bondtech CHT™ BiMetal Coated Brass Nozzle

In stock, quantities limited. Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. ALERT : Avoid Cold Bondtech CHT Nozzles Change Heat up the heat block up tp 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. Use at most 1.0 Nm torque. They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito and Mosquito Magnum Mosquito Liquid Mosquito Magnum+ Copperhead E3D V4, V5, and V6 blocks E3D Chimera and Kraken RepRap M6  Main Advantages Copper body; Hardened Vanadium Steel inserts; Nickel Coating; 1 unit per pack; Available sizes : 0.40, 0.60, 0.80, and 1.0mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench   ALERT : Size limitation for fiber loaded filaments For Carbon or Glass fiber loaded abrasive filaments use only 0.6, 0.8 and 1.0mm nozzle size. ALERT : For particle loaded filaments For metal, wood, glitter or other particle loaded abrasive filaments you may use the 0.4mm nozzle size.   Advantages of the Bondtech CHT™ technology: Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Advantages of the Nickel Coating A nickel coating is applied to the coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface. Recommendations: Use this nozzle with the any materials. More Information: Watch this video to learn more. Read White Paper.  CNC Kitchen - Bondtech CHT Review