Blum Thick Door Hinge for Back-to-Back Overlay Cabinets - Bundle

Blum's thick door half cranked clip top hinge for back-to-back doors. For door thicknesses from 19mm (3/4") to 30mm (1-1/8"). Please see the "Reveal & Overlay Information" document below to verify if this bundle will work for your application. What's Included 1 Blum Thick Door Half Cranked Hinge 1 Blum 0mm System Screw Frameless Mounting Plate Two #6 x 5/8" screws for the hinge Depending on cabinet side wall thickness you will need either of the following: For cabinet wall thickness of 5/8" to 7/8", you will need to use two back to back mounting screws. For cabinet wall thickness of 1" or greater, use two #6 x 5/8" screws. Mounting Screws for Mounting Plate (Not Included) Depending on cabinet side wall thickness you will need either of the following screws for the mounting plate: For cabinet wall thickness of 5/8" to 7/8", you will need to use back to back mounting screws. For cabinet wall thickness of 1" or greater, use #6 x 5/8" screws. Note that only two back to back screws are required for two hinges, whereas you would need four #6 x 5/8" screws for two hinges. Optional Accessories - Available for purchase separately: Cover Plate for Arm Part of Hinge - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268002) Cover Plate for Cup Side of Hinge - Hides the screws on the cup side providing a cleaner appearance (SKU 701114) Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268233) Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368) Blum Touch Latch for Self-Closing Doors (SKU 268822) 35mm Forstner Bit, for new installations (SKU 204000) Ecodrill, installation jig, for new installations (SKU 701000)