Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle

Blum Inserta straight arm hinge bundle for overlay doors on frameless cabinets. Inserta hinges install on the door without using screws. On the hinge cup is a cover that acts as a lever. By pressing down on the lever, an anchor device is expanded which secures the hinge. This type of hinge is also known as a tool-free or toolless hinge. This hinge uses two 8mm (5/16") holes where the wood screw holes would normally be to secure the hinge. See the document found under Downloads to view the Inserta screw hole pattern. The hinge and mounting plate attach to each other by snapping on. What's Included 1 x Blum Inserta Straight Arm Hinge 1 x Frameless Mounting Plate: There are four possible mounting plates for frameless overlay cabinets. Each plate is a different height, which, in combination with the bore distance, changes the door overlay. It is important to match up your overlay to make sure your doors sit in the right position on your cabinet. To chose the correct mounting plate, use the "How to Select Your Mounting Plate" document found under Downloads. 2 x #6 Wood Screws for the Mounting Plate Available for purchase separately: Cover Plate for the Hinge Arm - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268001) Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268230) Restriction clip. Limits angle of opening to 86 degrees (SKU 701113) Blum Touch Latch for Self-Closing Doors (SKU 268822) 35mm Forstner Bit, for new installations (SKU 204000) Ecodrill, installation jig, for new installations (SKU 701000)