Blum Blumotion Compact Hinge, Shallow Cup

Compact one piece European hinge with built-in Blumotion. Features Blum's Blumotion soft close mechanism which allows the cabinet door to close softly without banging. A shallow cup depth of 7/16" that can be useful for doors with a deep profile cut on the outside edge of the door. This hinge is also available with a standard cup depth (see related products below). A deactivation switch that can be used for small or light doors (flip the switch on one of the hinges to lessen the dampening action). An overload safety feature that protects the soft close mechanism if the door is slammed. 6-way adjustable after installation. Replacements When changing hinges on your door, you should change all of the hinges. Mixing different types or brands of hinges will cause door binding problems. This hinge may be used to replace any compact one piece European hinge that is installed with the following: the same overlay dimension a bore distance of 1/8" (the bore distance is the distance between the edge of the door and the edge of the cup drilled in the back of the door) a cup diameter of 35mm (1-3/8") a matching cup depth of 7/16" Notes Screws for the mounting plate side are not included but can be found below as a related product. Only one #10 pan head screw is needed per hinge. We sell these screws in packs of three. The 1-1/4" overlay hinge has a 107 degree opening angle. The mounting plate side of the hinge may differ slightly from what is shown in the image depending on the overlay of the hinge. Hinge comes with dowels and screws for the door side of the hinge. Dowels may be discarded if not needed. Accessories Cover Caps: These are attached to the mounting plate side of the hinge to give it more of a clean appearance. Low profile cover cap is for small overlay hinges (5/16" to 3/4") Medium profile cover cap is for larger overlay hinges (1-1/4" & 1-5/16") Spacer: For thin profile or beveled door. This is mounted underneath the cup side of the hinge.