Blum 110 Degree Hinge for Frameless Overlay Cabinets - Bundle

Blum's straight arm clip top hinge for frameless overlay cabinets. Available in self-closing and free swinging functionalities. ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5, purchase the hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered as an optional accessory. What's Included 1 Blum Straight Arm Hinge (Blum #71T3550 or 70T3580) 1 Blum Frameless Mounting Plate: There are four possible mounting plates for frameless overlay cabinets. Each plate is a different height, which, in combination with the bore distance, changes the door overlay. It is important to match up your overlay to make sure your doors sit in the right position on your cabinet. To chose the correct mounting plate, use the "How to Select Your Mounting Plate" document found under Downloads. Four #6 screws for the hinge and mounting plate Available for purchase separately: Cover Plate for Arm Part of Hinge - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268001) Cover Plate for Cup Side of Hinge - Hides the screws on the cup side providing a cleaner appearance (SKU 701156) Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268230) Note: Soft close does not work with free swinging hinge. Cup Spacer Plate - For doors with only a 12.5mm cup depth (SKU 701112) Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368) Restriction clip. Limits angle of opening to 86 degrees (SKU 701113) Blum Touch Latch for Self-Closing Doors (SKU 268822) 35mm Forstner Bit, for new installations (SKU 204000) Ecodrill, installation jig, for new installations (SKU 701000) Back-to-back screws for installations where two doors are installed to the same cabinet side panel (SKU 268249)