Blum 110 Degree Hinge for Back-to-Back Overlay Cabinets - Bundle

Blum's half cranked clip top hinge for back-to-back doors. Please see the "Reveal & Overlay Information" document below to verify if this bundle will work for your application. ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5, purchase the hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered as an optional accessory. What's Included 1 Blum Half Cranked Hinge (Blum #71T3650) 1 Blum 0mm System Screw Frameless Mounting Plate Two #6 x 5/8" screws for the hinge Mounting Screws for Mounting Plate (Not Included) Depending on cabinet side wall thickness you will need either of the following screws for the mounting plate: For cabinet wall thickness of 5/8" to 7/8", you will need to use back to back mounting screws. For cabinet wall thickness of 1" or greater, use #6 x 5/8" screws. Note that only two back to back screws are required for two hinges, whereas you would need four #6 x 5/8" screws for two hinges. Available for purchase separately: Cover Plate for Arm Part of Hinge - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268002) Cover Plate for Cup Side of Hinge - Hides the screws on the cup side providing a cleaner appearance (701156) Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268233)  Note: Soft close does not work with free swinging hinge. Cup Spacer Plate - For doors with only a 12.5mm cup depth (SKU 701112) Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368) Restriction clip. Limits angle of opening to 86 degrees (SKU 701113) Blum Touch Latch for Self-Closing Doors (SKU 268822) 35mm Forstner Bit, for new installations (SKU 204000) Ecodrill, installation jig, for new installations (SKU 701000)