Bliss-Box BlisSTer v3 (LLAPI capable device )

The BlisSter v3 board is identical to the V2. Improvements for v3. The LEDS now show LED status.  The power module is built in and now protects for ESD. It does not protect against over voltage, use 5v only! USB v-bus is now implemented. The switch is extruded out an addition 1 or 2 millimeters. The BlisSTer is a USB Hub board with integrated Gamer-Pro Logic chips and ports. The BlisSTer features an interface to Bliss-Box's LLAPI (Low Level API) taking advantage of many dirrect features and data from the Bliss-Box chips without the need of using USB. That means no USB lag at all! This add-on is intended for use with LLAPI cores maintained by Ricardo and other volunteers. Bliss-Box is not involved in the implementation of the software itself. Should you encounter any issues with the software, please contact Ricardo directly for assistance. Bliss-Box solely provides support for hardware-related inquiries only. Features: 5 x USB 2.0 ports Standard USB connection and polling rates 2 x Bliss-Box ports (HDMI form factor) to be used with our cables. Use original controllers with adapter cables. swappable from LLAPI to USBs seamless. Upgrade/Reset button for each Bliss-Box port. Power switch for entire MiSTer device Micro-USB 3.0 user port for LLAPI mode Includes 1 BlisSTer v3 1 USB micro to micro bridge 1 USB 3.0 user port cable 1 5 volt barrel to barrel connector 4 Stand off's (m3 14mm ) Warning: Do not use a 12v source! See this link for more info.  Does this work with the  Mister Pi YES it does. You will need these cables 1) female barrel power jack to USB C 1) USB A to USB micro.    Known before you buy!   Product Manual