Husqvarna 44" Gator Fusion Mower Blade 539119862 | Ram 44 | DISCONTINUED | New

Husqvarna 44" Gator Fusion Mulching Blade - Part #539119862 - DISCONTINUED / NewThis is the genuine Husqvarna Group 44 inch Gator Fusion mulching blade, part number 539119862, for Dixon zero turn decks. It combines the Gator serrated mulching sail with the Fusion series construction and is aimed at operators mulching clippings back into the turf on a 44 inch deck. This part number is discontinued, so this is new old stock. ⚠ VERIFY FITMENT BEFORE ORDERING Mower blade fitment is decided by blade length, center hole size, mounting pattern and lift height, not by deck size alone. Check this part number against the parts diagram for your exact model and serial number before you buy. ⚠ SOLD INDIVIDUALLY - ONE BLADE PER LISTING This listing is for a single blade. Multi-blade decks need more than one, so order the quantity your deck requires. ⚠ DISCONTINUED PART - LIMITED REMAINING STOCK Husqvarna has ended production of this blade. Dealer channels list it as no longer available. Once current stock is gone there is no factory replacement under this part number.Specifications Part Number: 539119862 Also Known As: Dixon 13947, Husqvarna 539121259 Brand: Husqvarna (Husqvarna Group OEM, supplied for Dixon branded equipment) Manufacturer Description: Blade 44" Gator Fusion Size Designation: For 44 in cutting deck. Three blades are required to make a full 44 in cut. Lift Type: Gator mulching profile, Fusion series Fusion Coating: Yes, Fusion series blade as designated by the manufacturer Blade Length: 14-15/16 in (this is the individual blade length, not the deck size) Blade Width: 2-1/2 in Blade Thickness: 0.203 in Center Hole and Outer Holes: Not published consistently across sources for this part number, so no figure is stated here. Measure your existing blade before ordering. Quantity: Sold individually, one blade Condition: New Key Features Gator Mulching Sail The serrated upper sail recuts clippings repeatedly inside the deck so the particles that reach the turf are fine enough to drop out of sight. Fusion Series Construction The manufacturer designated Fusion version of the 44 inch Gator blade, carrying its own part number. Three Blade Deck Application The 44 inch Dixon Ram deck takes three of these blades for a full cut, so order accordingly rather than assuming a single blade completes the deck. Factory Pre-Sharpened Ships sharpened with protective paint over the cutting edge. CompatibilityConfirmed fitment: 44 inch Dixon zero turn decks, including the Dixon Ram 44, which uses three blades per deck. Confirmed to supersede Dixon 13947 and Husqvarna 539121259. Fitment above is limited to what the manufacturer and OEM dealer catalogs confirm for this part number. No other deck or model fitment is claimed here. Always confirm this part number against the parts diagram for your model and serial number before ordering. Cross-ReferenceThis blade supersedes the following OEM part numbers within the Husqvarna Group parts system: Dixon 13947 (legacy Dixon part number) Husqvarna 539121259 Why Buy OEM?A genuine Husqvarna Group blade is built to the factory print for length, center hole and mounting pattern, so it seats correctly on the spindle and stays in balance at full tip speed. An out of balance or mismatched blade puts load straight into the spindle bearings and the deck, and an incorrect center hole is a genuine safety hazard on a rotating component. OEM steel and heat treatment also hold an edge to the tolerance the deck was designed around. Discontinued NoticeHusqvarna Group has discontinued part number 539119862 and OEM dealer channels list it as no longer available. Because a 44 inch Ram deck needs three blades at a time, owners burn through remaining stock three at a time rather than one, which is why discontinued ZTR blade numbers in this size disappear quickly. There is no factory replacement blade under this number. Why Buy From Us ✔ Genuine Husqvarna Group OEM part, not aftermarket ✔ Brand new, never installed ✔ Correct factory dimensions and mounting pattern ✔ Sold individually so you can order the exact quantity your deck needs ✔ Discontinued part number, new old stock while it lasts ✔ Fast Shipping - Ships Quickly from the USA Keywords539119862, Husqvarna 539119862, Dixon 13947, 539121259, 44 inch mower blade, Gator Fusion blade, Gator mulching blade, Dixon Ram 44 blade, 14-15/16 mower blade, Dixon ZTR blade, zero turn mower blade, OEM Husqvarna blade Important - Please Read Before PurchaseVerify compatibility before purchasing. Confirm part number 539119862 against the parts diagram for your exact model and serial number, and confirm blade length, center hole and mounting pattern against the blade currently on your deck. Blade fitment varies between production runs of decks that look identical. This item is sold as a single new blade and is not a set. If you are unsure, send us your model and serial number before you order.