Black Siser Brick 600 HTV | Heat Transfer Vinyl 20"

Siser Brick 600 is a 600 micron thick and yet flexible heat transfer vinyl that works great for smaller logos or designs to add a little extra dimension to all of your garments. Siser Brick 600 has a matte finish which looks great on caps, bags, and is ideal for left chest logos. If you need a little pop to your designs or if your designs are looking a little flat, consider giving it some dimension with Siser Brick 600! Siser Brick is popular in the corporate logo use and can be cut with laser systems. Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories. 20" width material Matte finish 600 microns thick Static liner Cannot layer Polyurethane composition CPSIA Certified 311° F Preheat garment for 2-3 seconds; Tack design for 10 seconds (face side) ; Turn inside out heat for 20 seconds on adhesive side Cold Peel Medium pressure Cut in reverse Adheres to 100% cotton, poly/cotton blends, 100% uncoated polyester, Lycra/spandex Wait 24 hr before first wash. Machine wash cold w/mild detergent. Do not dry clean.. Do not Bleach. Dry at low setting Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. 1. Cut In Reverse 2. Weed 3. Preheat Garment 20 seconds 4. Tack design for 10 seconds - face side 5. Turn inside out heat for 20 seconds on adhesive side   Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended. 1. Offset: 0 2. Speed: 25 cm/s 3. Acceleration: 4 4. Cut Force: 30 Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Flocked Blade: Standard, 10 Speed: 4 Force: 33 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Light Cardstock Pressure: More Blade: Fine-Point Blade (Standard)