Bench Lathe Tooling Package, Basics + OXA QCTP

If you have a bench lathe and work on smaller project with smaller tools (1/4", 5/16" etc.) and OXA tool post is a good option. If working on larger project or using larger tools, we recommend the AXA tool post. This tooling package contains premium quality tooling and the hardware to replace a stock turret tool post for a LittleMachineShop.com HiTorque 8.5" Swing Bench Lathes. Also fits SIEG C4, SC4, and SC50 Lathes Includes a 0XA (Series 000) quick change tool post set (3112) and a mounting post (4117). This set includes the tool post and the following tool holders: 2 - #1 Turning and Facing 1 - #2 Boring, Turning and Facing 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars 1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal The quick-change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It may require some work in order to make a T-slot nut, to mount this QCTP on your lathe. The turning tool holders accept tools up to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades. This set also includes: The 1/2" capacity drill chuck (1212) is mounted on a standard 2 Morse taper arbor (2955). The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). Set of 5 indexable turning tools (AR, AL, BR, BL, E), inserts, a wrench, and extra screws. It comes in a wooden case. The carbide inserts are TCMT-21.51 (1669). The 9-piece carbide tipped boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". Heat treated, alloy steel shanks (1247). The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance (1930). 5-piece combined drills and countersinks (center drills). The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60-degree center drills. These are the sizes that are most used by bench top machinists (1230).