72" Heavy Verge 3Point Offset Flail Ditch Bank Mower, 60-85hp , BEMZ180

Power Required 60-85 Hp Belt Adjustment Manual Mechanical Tension Working Width 72in Working Efficiency450 cu.ft./Hr. 450 cu.ft./Hr. Overall Width 89in PTO Shaft Speed 540 rpm Blade Ground Clearance 0.5in-2.5in Deck Thickness 0.16 in Max. Cutting Diameter 2in Side Plate Thickness 0.25 in Offset Distance from The Center (Maximum) 124in Driveline Shaft Length T5-LF-49  with Shear Bolt ; 49in-71in Tilt-Up Angle 90° Spline End 1.375in  Z6 Tilt-Down Angle 40° 3-Point Hitch CAT 2 Number Of Blades 16 Gearbox 0il Type 85W-90 Number of Belts 4 Finsh  Powder Coating Blade Type Hammer Warranty 1 Year Blade Weight 2.6 lbs Shipping Box 89 X 39 X 31in Blade Material Cast Steel Weight (N.W./G.W.) 1232/1298 lbs   WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soot, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.