Beaded Retainer Rings - For 13" to 36" Diameter Flagpoles - White

Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of either a combination of 1" & 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link (included). The length of each retainer ring is determined by measuring from the outside tip of each thimble.  *If you need smaller sizes, click HERE **These are only available in white ***To figure out your flagpole diameter, measure around the flagpole, take that number and divide by 3.14 Retaining Rings Sizes: 13" Butt = 62" Length | 1" & 2" Diameter Balls 14" Butt = 66" Length | 1" & 2"  Diameter Balls 16" Butt = 74" Length | 1" & 2"  Diameter Balls 18" Butt = 82" Length | 1" & 2"  Diameter Balls 20" Butt = 90" Length | 1" & 2"  Diameter Balls 22" Butt = 98" Length | 1" & 2"  Diameter Balls 24" Butt = 106" Length | 1" & 2"  Diameter Balls 30" Butt = 124" Length | 1" & 2"  Diameter Balls 32" Butt = 132" Length | 1" & 2"  Diameter Balls 34" Butt = 140" Length | 1" & 2"  Diameter Balls 36" Butt = 148" Length | 1" & 2"  Diameter Balls