78" Heavy Verge 3Point Offset Flail Ditch Bank Mower, 75-110hp , AGFK200

Power Required 75-110 Hp Belt Adjustment Manual Mechanical Tension Working Width 78 in Working Efficiency450 cu.ft./Hr. 500 cu.ft./Hr. Overall Width 90in PTO Shaft Speed 540 rpm Blade Ground Clearance 0.5in-2.5in Deck Thickness 0.16 in Max. Cutting Diameter 2in Side Plate Thickness 0.25 in Offset Distance from The Center (Maximum) 127in Driveline Shaft Length T6-LF-65  with Shear Bolt ; 65in-77in Tilt-Up Angle 90° Spline End 1.375in  Z6 Tilt-Down Angle 40° 3-Point Hitch CAT 2 Number Of Blades 26 Gearbox 0il Type 85W-90 Number of Belts 4 Finsh  Powder Coating Blade Type Hammer Warranty 1 Year Blade Weight 2.6 lbs Shipping Box 96 X 39 X 31in Blade Material Cast Steel Weight (N.W./G.W.) 1645/1711 lbs WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soot, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.