DiveRite TransPac XT/Voyager XT Wing Dive Package w/ 16lb Weight Pockets

This is the DiveRite TransPac XT/Voyager XT Wing Dive Package with 16lb Weight Pockets Features: TransPac XT Soft backplate constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance Marine grade stainless sideplates provide custom fit and performance depending on placement at waist Shoulder straps feature pivot rings at chest level for load distribution and acetyl resin quick release buckles for easy doff and don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations. Two-inch (50 mm) nylon webbing rated at 7,000 pounds breaking strength forms the shoulder and waist straps. Dual, 36-inch cam straps with lightweight marine stainless buckles Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness and provide maximum security. Weight XS:4 lbs 4 oz (1.92kg), Sm:4 lbs 4 oz (1.95kg), Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg), XXL:4.93lb (2.23kg), Made in the U.S.A. Voyager XT Wing Model BC5200 Voyager XT: SuperFabric brand technology outer shell and 1680 ballistic nylon diver's side panel (extremely resistant to pinches and punctures) Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures) Wing Gusset Control system for streamlining Lift: 35 lbs. (15.8 kg) LP inflator hose 16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools Weight: 2.8 lbs. (1.27 kg) Size: 22-in. H x 19-in. W (55.8cm x 48.3cm) Made in the USA 16 lb Weight Pockets Holds up to 8 lbs (3.6 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo. 1680 denier ballistic nylon fabric is tear and abrasion resistant. Two-inch (50.8 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place. Acetyl quick buckle is used to easily secure the pocket in the holster. Nickel plated brass grommets resist rust and corrosion. 9-in high x 3.5-in wide x 1.5-in deep (22.9 cm x 8.9 cm x 3.8 cm) 12 oz (340.2 g) Made in the U.S.A. "