Bauer Supreme Fuse Pro Goalie Leg Pads [Pro Custom]

Custom Order Your Bauer Supreme Fuse Goalie Leg Pads at Goalies Plus 50% Deposit to place your order! 50% Balance due on completion of your order Go to Bauer Customizer web site: Bauer.com and fill out the custom your custom colors and specs! Call Goalies Plus at 1-800-599-2440 X2 and provide Recipe ID number to Mike or Ty Bauer Supreme Fuse Pro Custom Goalie Leg Pads Ready to custom order your new Bauer Supreme Fuse goalie leg pads – Goalies Plus has you covered!  Bauer’s process makes ordering your new pads a breeze with the Recipe ID system.  Simply log onto Bauer.com, go to the Customize tab near the top right corner of the page, click on customize and select Goalie Gear to customize.  Once you have a Recipe ID number, simply put it in the comment section of order and Goalies Plus will start the process.  If you would like to take advantage of the 50% deposit with 50% due on delivery method of payment, simply call 1-800-599-2440 X2 and speak with Mike or Ty to place your order. The Bauer Supreme goalie line has always been Bauers number one pad at the pro level for years.  This is because the Supreme line is generally a stiffer option than the Vapor lines.  However, we must mention that a lot of these pro goalies tend to be on the taller side and the stiffer option tends to work better with taller goalies versus shorter goalies.  The solution to this problem – build the pads any way you like with the Bauer Pro Custom options.  A goalies can build a stiff pad, a soft pad, a Vapor pad with a Fuse graphic – anything you like. A stock Fuse pad does not come nearly as stiff as it did back in the Supreme Mach era.  Although stiffer than a Vapor pad, a stock Supreme Fuse comes in a mid-flex which still has some flexibility – particularly below the knee.  From the bottom of the knee through the thigh rise, the pad does keep a stiffer feeling.  The core comes with the Rebound Boast Core which produces one the most explosive rebounds on the goalie leg pad market, The outer skin will continue to use the SLD3R skin. This has been shown to have great slideability and also has better long-term durability. Bauer will continue to use the Stabilislide knee block system on the stock Fuse goalie pads although the shape has been altered a bit from the Shadow.  The Slabilislide knee block has been proven to provide greater stability to the goalie in the butterfly position and also moving laterally in the butterfly slide techniques and also provides a better overall seal to the ice surface.  The stock knee wing on the Supreme Fuse is removable, so if the goalie prefers the knee strapping to be angled versus behind the knee – this flap can be easily removed.  There are four variations of the knee wing that can be custom ordered. Bauer Fuse has changed the Stabili-Calf system for 2026.  The new Fuse Stabili-Calf has gone to a single bracket design versus a double bracket design on the previous Shadow pads.  This was done to bring the calf closer to the leg and give the goalie better support when they are in their various butterfly techniques. The strapping system on the Bauer Supreme Fuse leg pads features the new control lock system.  The Control Lock strapping is a bit stronger than the previous Tune-Fit strapping system.  The name speaks for itself as it locks the lower leg in place more so than the Tune-Fit which had more elastic and stretch to it.  If you still like the Tune-Fit system, the Vapor Slyd system would be the option you would want on a custom order. allows the goalie to customize the fit of the pad in a matter of seconds. The Supreme Fuse will have a new recoil boot system.  Instead of using a soft boot flex, the new recoil system will be slightly stiffer, but when the goalie loads the ankle and pushes, the recoil boot will help create power in this push by acting as a spring-loaded boot.  The boot will come stock with the 120-degree angle – the same as the Shadow. Again, if you prefer the soft boot and the Vapor 100-degree boot angle, these are options on a custom order. In the toe area, Bauer will continue to use Pro Elastic Toe Tie on the stock models.  This new toe tie system allows for greater adjustability in the bungee cord system without having to take the entire toe tie system apart.  There are four settings on the toe bridge that a goalie can choose from on the stock model.  If a goalie prefers skate lace, it can be changed in a matter of minutes. Bauer leg pads do run smaller than Vaughn and CCM.  So, if you are a 34+ in a Vaughn or a CCM, more than likely you will be a 35+ in a Bauer.  Please reference our goalie sizing guide for proper sizing instructions. Bauer Supreme Fuse Pro Custom Options: Construction: Vapor Flylite Supreme Fuse Thigh Flex: 1 = Soft 2 = Semi-Soft 3 = Mid 5 = Extra Stiff Knee Block Construction: Stabiliflex (Stock Vapor) Stabilislide (Stock Supreme) Boot Flex: Deep Soft (Has a defined boot channel) Deep Mid (Has a defined boot channel with recoil boot) Flat Soft (Has a defined boot channel) Flat Mid (Has a defined boot channel with recoil boot) Calf Bracket: Calf bracket No calf bracket Knee Wing Options: Adjustable (Center position) Sewn In (Center position) Remove Tune Fit Connect – Professor Strap: Professor strap sewn in below knee Professor strap removed Calf Strapping Slyd Strapping Calf lock style Professor Strap (Below Knee Strap) No Professor Strap (Stock option) Professor Strap sewn in below knee Boot Strap: None Elastic/Velcro Short Elastic/Velcro Long Leather Toe System: Supreme Toe Bridge – Centered Supreme Toe Bridge – Offset Vapor Toe Tab – Centered Vapor Toe Tab – Offset Elastic Toe Tie Skate Lace Toe Tie Pad Sizing: X-Small = 32+ Small = 33+ Medium = 34+ Large = 35+ XL = 36+ XXL = 37+ Thigh Rise Sizing: Plus 1 Plus 0.5 Plus 0 Custom Pro Vs. Custom on Bauer Customizer: Bauer offers two levels of customization – Custom Pro & Custom Custom = Colors and can changed and embroidery can be added – No changes to internals of the pad Custom Pro = Colors and internal options can be changed