Barton DIY Cold Tub

Meet the chiller-ready Barton DIY Cold Tub. The same commercial-grade, fully insulated cold plunge tub and equipment cover with drip tray as the The Barton Cold Plunge, but without the chiller, water pump or filtration system.  Level-up from that leaky inflatable ice bath, dangerous chest freezer conversion or uninsulated tub with the industry's best DIY cold therapy solution. Features: Indoor/outdoor safe Lockable lid with gasket and rust-resistant prop Up to 4.5 inches of closed-cell insulation Ventilated equipment cover with drip pan Molded-in 3/4-inch NPT chiller in/out ports Molded-in inserts for filter mounting Garden hose drain valve and pre-pump strainer Made in USA Total Dimensions: Length - 86.75" Width - 33.5" Height - 35.5" Empty Weight (Tub Only) - 160lbs Shipped Weight - 223lbs Internal Tub Dimensions: Length - 53.25" Width - 26" Depth - 27.25" Capacity - 150 Gallons Equipment Housing Internal Dimensions: Drip Pan Length - 27" Drip Pan Width - 22" Housing Height - 24" Confirmed Chiller Fitment: Active Aqua 1/4, 1/2, and 1 HP Rocita 1/3 and 1/2 HP Penguin Chillers Cold Therapy Chiller Please note: This is a DIY cold tub and requires the addition of either an all-in-one chiller OR a stand-alone chiller, water pump and filtration system to turn it into an iceless cold plunge.  Check "Equipment Housing Internal Dimensions" above to verify fitment of chillers not listed. Please CONTACT US if you have any questions.