Bambu PLA Sparkle

Bambu Lab PLA Sparkle Filament Special Sparkling Look Relatively High Impact Strength Comes with Basic Reusable Spool Diameter: 1.75mm +/- 0.03mm Cautions for Use All AMS Series Compatible 0.2 mm Nozzle NOT Compatible Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest. However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle! Accessory Compatibility Recommended Not Recommended Build Plate Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate / Hotend Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm Hotend with Stainless Steel Nozzle 0.2 mm Glue Bambu Liquid Glue Glue Stick /   PLA Sparkle Hex Code Table Color Hex Code Classic Gold Sparkle #CEA629 Slate Gray Sparkle #8E9089 Crimson Red Sparkle #792B36 Royal Purple Sparkle #483D8B Alpine Green Sparkle #3F5443 Onyx Black Sparkle #2D2B28   Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C, 8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 250 mm/s   Physical Properties Density 1.26 g/cm³ Vicat Softening Temperature 57 °C Heat Deflection Temperature 55 °C Melting Temperature 156 °C Melt Index 34.2 ± 3.3 g/10 min   Mechanical Properties Tensile Strength 33 ± 3 MPa Breaking Elongation Rate 11.7 ± 0.7 % Bending Modulus 2310 ± 140 MPa Bending Strength 63 ± 4 MPa Impact Strength 66.5 ± 3.6 kJ/m²   Filament TDS Filament MSDS