Bambu Lab A1 3D Printer

Bambu Lab A1 3D Printer Active Flow Rate Compensation The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy. Full Auto Calibration The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. Quick Swap Nozzle All-new quick swap hotend design, the hotend pops in and out with just 1-Clip. Active Motor Noise Cancelling The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise. Bed Slinger with CoreXY Speed And Quality Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments. Product Features Full-auto Calibration Multi-Color Printing (Combo Version) Active Flow Rate Compensation 1-Clip Quick Swap Nozzle Active Motor Noise Cancelling 256*256*256 mm³ Build Volume The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief. Specifications Body Build Volume(W*D*H) 256*256*256 mm³ Toolhead Hot End All-Metal Nozzle Stainless Steel Max Hot End Temperature 300 °C Nozzle Diameter 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm Heatbed Build Plate Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate Bambu Dual-Texture PEI Plate Bambu High Temperature Plate (Smooth PEI) Bambu Cool Plate Max Build Plate Temperature 100°C Speed Max Speed of Tool Head 500mm/s Max Acceleration of Tool Head 10000mm/s² Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended Sensors Chamber Monitoring Camera Low Frame Rate Camera (Up to 1080P) Timelapse Supported Filament Run Out Sensor Yes Filament Odometry Yes Power Loss Recover Yes Filament Tangle Sensor Yes Physical Dimensions A1 : 385*410*430 mm³ , Package size : 596*536*325 mm³ , Net weight 8.3 kg , Gross weight 13 kg A1 Combo : Package size 560*540*430 mm³ , Gross weight (AMS lite included) 13.5 kg