$2,895.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Running several handpieces at one bench station, and switching between them without stopping to flip a switch, is the job this control system does. The Badeco MX-4 Touch Evolution LCD is a professional bench micromotor control system that powers up to four handpieces and four micromotors from a single unit. Updated in Fall 2024 with an LCD display, it uses built-in light sensors to detect which handpiece has been lifted from its holder and directs power to that tool automatically. This kit pairs the control box with the New Carbon 465 quick-change handpiece, an RS2000 micromotor and a PC800 variable-speed foot control. The RS2000 micromotor runs 2,000–20,000 RPM with high torque across the full range, and the 465 handpiece takes 3/32" (2.35mm) shank tools in a quarter-turn collet. The control box is dual voltage, running on 115V or 220V / 240V. Features Auto-select power: built-in light sensors activate the handpiece removed from its holder; cover unused holders with tape to keep them inactive. LCD interface (2024 update): clear readout of settings and operating status. Dual voltage: 115V or 220V / 240V operation for worldwide use. RS2000 performance: high torque across the full 2,000–20,000 RPM range, suited to drilling and stone-setting work. Rapid bur changes: the 465 handpiece uses a quarter-turn collet for tool changes without stopping the motor. Version 2 control box: updated 6-prong connector compatible with PC200 and PC800 foot controls. Three operating toggles: Hand/Foot mode, Forward/Reverse direction, and set-speed or variable-speed foot behavior. Expandable system: add handpieces and RS2000 micromotors to build a full four-station setup. Compatibility PC200 and PC800 foot controls through the 6-prong connector on the V2 control box Additional Badeco handpieces and RS2000 micromotors, up to four of each on one control box Rotary tools with a 3/32" (2.35mm) shank in the 465 handpiece collet Notes Collet precision: the 465 collet is manufactured to tight tolerances for true 3/32" shanks. For best results, use precision burs from makers such as Busch, Brasseler/Germany (Fox, Panther, Komet) and Dentsply Maillefer. Activation: MX-4 Touch Evolution units ship with the holder light sensors covered. Remove the tape to activate a holder and leave tape on unused holders to keep them inactive. Expandability: start with this single-handpiece kit and add handpieces and RS2000 micromotors to build a custom four-station configuration. Service: factory service and repairs are handled by the manufacturer at 8 rue de la Coulouvrenière, CH-1204 Genève, Switzerland. Refer to the warranty card included with your unit for instructions.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2025
$2,895.00