E36/E46 Billet B48 Engine Conversion Mounts

Strom E36/E46 B48 Engine Conversion Brackets Used on our very own E36 B48 Swap! The B48 platform is becoming one of the most exciting modern swap options thanks to its compact size, impressive torque curve, factory reliability, and tuning potential. If your looking to modernize your E36 or E46 with a compact, powerful motor, then the B48 Swap might be for you. Power levels depend on exact configuration, but stock turbo setups can be in the range of 250-300 WHP.  These Strom mounts are produced from 6061 aluminum and are the exact engine mounting brackets that were designed to meet Strom's requirements to fit a B48 engine in their race chassis.  Designed to fit the E46 or E36 chassis in the most efficient way possible. Compatible with factory E46/E36 subframe and compatible with OEM factory-style engine mounts. That means they can be used with OEM stock rubber if you are doing a street car or you can go solid/poly for race application. If the bushing was made for an E46 with M54 or S54, its compatible. On the Garagistic Grip-B48 E36 Project our poly bushings found here were used in the conversion. If you plan to use Motec or Similar, you might want to also pick up a Valvetronic Lockout Kit! If you plan to delete the AC, then you will also need to make sure you get this pulley.  Check out all the parts we offer for this swap here. If you are interested in learning more about this swap before diving in, be sure to check our YouTube channel on the full E36 B48 Build series with Strom. Features: Optimized for strength and weight relative to cost For use with a B48 engine in an E46 or E36 chassis Just clears subframe at front of oil pan however minor modification/ fabrication required to provide clearance for the engine at the back of the engine bay. CNC Brackets and hardware only Compatible with Garagistic E36 X-Brace Don't forget to get a weld-it-yourself DSSR to help with your swap.